restructure results

1 files changed, 58 insertions, 0 deletions

diff --git a/results/classifier/deepseek-r1:14b/reasoning/manual-review/1738691 b/results/classifier/deepseek-r1:14b/reasoning/manual-review/1738691
new file mode 100644
index 000000000..b6c88451c
--- /dev/null
+++ b/results/classifier/deepseek-r1:14b/reasoning/manual-review/1738691
@@ -0,0 +1,58 @@
+<think>
+Okay, so I'm looking at this log that was provided, and it's a bunch of messages from what looks like a system boot process or some initialization phase. The user mentioned that the system is hanging, and they're seeing these messages. My task is to figure out what's going on here.
+
+First, I notice that many of the lines start with timestamps and modules being loaded or registered. For example, "Classifytrig-cpu: registered" probably means some CPU-related module is initializing. Then there are entries about protocol families 10 and 17 being registered, which makes sense because IPv4 (family 10) and IPv6 (family 17) are standard networking protocols.
+
+Then I see a lot of lines mentioning modprobe with signal 11. Signal 11 is SIGSEGV in Unix-like systems, which means there's a segmentation fault happening. Modprobe is a tool used to load kernel modules, so if it's getting a segmentation fault, that suggests something is going wrong when trying to load these modules.
+
+Looking closer at the modprobe lines:
+- modprobe[89]: unhandled signal 11
+- modprobe[90]: same issue
+- Similarly for 93, 94, 97, 98.
+
+This seems like a recurring problem with modprobe. Maybe one of the modules it's trying to load is causing a crash because of an invalid pointer access or something wrong in its code. If this happens multiple times, it could be leading to instability.
+
+Another thing I notice is the mention of X.509 certificates and key types like dns_resolver, big_key, trusted, encrypted. The system is trying to load some security-related modules but then there are errors about not being able to open files in /etc/keys for x509_ima.der and x509_evm.der. These files might be missing or corrupted, which could prevent certain security modules from initializing properly.
+
+Then there's the line about zswap using lzo/zbud pool. That's related to memory management, swapping, so maybe not directly causing the hang but perhaps contributing to resource issues.
+
+The "ima: No TPM chip found" message suggests that the system is trying to use a TPM (Trusted Platform Module) for security features but isn't finding one. This could be a hardware issue or missing firmware. The system then activates TPM-bypass, which might not be suitable for all environments, especially if security policies require TPM support.
+
+The "evm: HMAC attrs: 0x1" line is about Enhanced Verification Modules, another security feature. If the kernel can't load necessary keys or modules due to file issues, this could prevent proper system initialization.
+
+Then there are messages about freeing unused kernel memory and a note that the architecture doesn't have kernel memory protection. That might mean it's running on an older CPU without certain protections, which could be relevant if security is a concern but perhaps not directly causing the hang.
+
+The last line says "<hang>", so this indicates the system is stuck and not proceeding further. Given all these messages, I think the main issues are:
+
+1. Multiple modprobe failures with SIGSEGV. This is critical because it's happening during module loading, which could be essential for booting.
+2. Missing or corrupted X.509 certificates in /etc/keys, preventing some security modules from initializing.
+3. No TPM chip found, leading to potential issues with security policies.
+
+The system might be hanging because modprobe is failing repeatedly, causing the initialization process to stall. Alternatively, if too many modules fail to load, the boot process could halt or enter a recovery mode.
+
+I should also consider whether these module failures are due to hardware issues (like a faulty CPU or memory), software bugs in the kernel modules, or configuration problems (like incorrect paths for certificates).
+
+To troubleshoot, I might suggest checking if all necessary files exist in /etc/keys. If they're missing, perhaps they need to be regenerated or installed. Also, looking into why modprobe is failing with SIGSEGV—maybe there's a specific module that's causing this and needs to be examined.
+
+If the system lacks a TPM chip, it might require a different security setup or disabling of policies that depend on TPMs. Alternatively, checking if the firmware or drivers for the TPM are correctly loaded could help.
+
+Overall, I think the combination of modprobe crashes and missing security certificates is leading to the hang during boot.
+</think>
+
+The system is experiencing multiple failures during its initialization process, which is causing it to hang. The key issues identified are:
+
+1. **Modprobe Failures**: There are recurring segmentation faults (SIGSEGV) in modprobe, indicating problems when loading kernel modules. This could be due to faulty modules, incorrect configurations, or hardware issues.
+
+2. **Missing X.509 Certificates**: The system is unable to load necessary security-related certificates from /etc/keys, which might prevent certain security modules from initializing correctly.
+
+3. **TPM Chip Absence**: The absence of a TPM chip causes the system to bypass TPM-based security features, potentially leading to issues with security policies that require TPM support.
+
+**Recommendations:**
+
+- **Check and Replace Certificates**: Verify if the missing X.509 certificates exist in /etc/keys. If they are missing, consider generating or reinstalling them as needed by your system's security configuration.
+
+- **Investigate Modprobe Failures**: Identify which specific modules are causing modprobe to fail with SIGSEGV. This might involve disabling problematic modules temporarily or updating the kernel if bugs exist.
+
+- **TPM Chip Check**: Ensure that a TPM chip is present and properly configured. If not, adjust security policies accordingly, as some systems may require alternative methods for secure booting.
+
+By addressing these issues, particularly focusing on module loading failures and missing certificates, the system should be able to complete its initialization process without hanging.
\ No newline at end of file