add deepseek and gemma results

1 files changed, 53 insertions, 0 deletions

diff --git a/results/classifier/gemma3:12b/peripherals/1920752 b/results/classifier/gemma3:12b/peripherals/1920752
new file mode 100644
index 000000000..6b099d7d1
--- /dev/null
+++ b/results/classifier/gemma3:12b/peripherals/1920752
@@ -0,0 +1,53 @@
+
+USB SoundCard Passthrough not working on arm64
+
+Hello,
+
+I am virtualizing a armhf guest on a aarch64 host and was to use my Sound Blaster USB Soundcard as passthrough. 
+
+armhf Guest is: Debian Buster 
+aarch64 host is a jetson nano. KVM is enabled.
+
+Latest qemu is built from sources.
+The command I use for running is as follows:
+
+../qemu/build/qemu-system-aarch64 -M virt -m 2048 -smp 2 -cpu host,aarch64=off -enable-kvm  \
+-kernel vmlinuz-4.19.0-14-armmp-lpae  -initrd initrd.img-4.19.0-14-armmp-lpae -append 'root=/dev/vda2' \
+-device nec-usb-xhci -device usb-kbd  -device usb-mouse -device usb-host,hostbus=1,hostport=2.3  -serial stdio  \
+-device virtio-gpu-pci,virgl=on,xres=1600,yres=900 -display sdl,gl=on \
+-drive if=none,file=hda2.qcow2,format=qcow2,id=hd   -device virtio-blk-device,drive=hd   \
+-netdev user,id=mynet   -device virtio-net-device,netdev=mynet \
+-bios edk2-arm-code.fd -no-reboot
+
+
+Where are my lsusb -t shows:
+
+rreddy78@jetson-nano:~/Downloads$ lsusb -t
+/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=tegra-xusb/4p, 5000M
+    |__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/4p, 5000M
+/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=tegra-xusb/5p, 480M
+    |__ Port 2: Dev 6, If 0, Class=Hub, Driver=hub/4p, 480M
+        |__ Port 1: Dev 7, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
+        |__ Port 1: Dev 7, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
+        |__ Port 3: Dev 8, If 3, Class=Human Interface Device, Driver=usbhid, 12M
+        |__ Port 3: Dev 8, If 1, Class=Audio, Driver=snd-usb-audio, 12M
+        |__ Port 3: Dev 8, If 2, Class=Audio, Driver=snd-usb-audio, 12M
+        |__ Port 3: Dev 8, If 0, Class=Audio, Driver=snd-usb-audio, 12M
+        |__ Port 4: Dev 9, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
+
+Within the VM I can see the usb as follows
+
+rreddy78@debian:~$ lsusb -t
+/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
+/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
+    |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 480M
+    |__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 480M
+
+
+Its looks like some passthrough as but it seems like only for
+
+ _ Port 3: Dev 8, If 3, Class=Human Interface Device, Driver=usbhid, 12M
+
+I am not sure if passthrough  even works because this post I saw
+
+https://community.arm.com/developer/ip-products/system/f/embedded-forum/48031/usb-pass-through-in-qemu-command-line-for-arm-machines/168764#168764
\ No newline at end of file