diff options
Diffstat (limited to 'results/classifier/012/mistranslation/74466963')
| -rw-r--r-- | results/classifier/012/mistranslation/74466963 | 1896 |
1 files changed, 1896 insertions, 0 deletions
diff --git a/results/classifier/012/mistranslation/74466963 b/results/classifier/012/mistranslation/74466963 new file mode 100644 index 000000000..6eae5811c --- /dev/null +++ b/results/classifier/012/mistranslation/74466963 @@ -0,0 +1,1896 @@ +mistranslation: 0.927 +assembly: 0.910 +device: 0.909 +permissions: 0.907 +kernel virtual machine: 0.906 +debug: 0.897 +register: 0.896 +files: 0.896 +graphic: 0.895 +TCG: 0.895 +boot: 0.894 +arm: 0.893 +architecture: 0.893 +performance: 0.892 +semantic: 0.891 +risc-v: 0.890 +PID: 0.886 +socket: 0.879 +vnc: 0.878 +other: 0.877 +network: 0.871 +x86: 0.857 + +[Qemu-devel] [TCG only][Migration Bug? ] Occasionally, the content of VM's memory is inconsistent between Source and Destination of migration + +Hi all, + +Does anyboday remember the similar issue post by hailiang months ago +http://patchwork.ozlabs.org/patch/454322/ +At least tow bugs about migration had been fixed since that. +And now we found the same issue at the tcg vm(kvm is fine), after +migration, the content VM's memory is inconsistent. +we add a patch to check memory content, you can find it from affix + +steps to reporduce: +1) apply the patch and re-build qemu +2) prepare the ubuntu guest and run memtest in grub. +soruce side: +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +pc-i440fx-2.3,accel=tcg,usb=off +destination side: +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881 +3) start migration +with 1000M NIC, migration will finish within 3 min. + +at source: +(qemu) migrate tcp:192.168.2.66:8881 +after saving ram complete +e9e725df678d392b1a83b3a917f332bb +qemu-system-x86_64: end ram md5 +(qemu) + +at destination: +...skip... +Completed load of VM with exit code 0 seq iteration 1264 +Completed load of VM with exit code 0 seq iteration 1265 +Completed load of VM with exit code 0 seq iteration 1266 +qemu-system-x86_64: after loading state section id 2(ram) +49c2dac7bde0e5e22db7280dcb3824f9 +qemu-system-x86_64: end ram md5 +qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init + +49c2dac7bde0e5e22db7280dcb3824f9 +qemu-system-x86_64: end ram md5 + +This occurs occasionally and only at tcg machine. It seems that +some pages dirtied in source side don't transferred to destination. +This problem can be reproduced even if we disable virtio. +Is it OK for some pages that not transferred to destination when do +migration ? Or is it a bug? +Any idea... + +=================md5 check patch============================= + +diff --git a/Makefile.target b/Makefile.target +index 962d004..e2cb8e9 100644 +--- a/Makefile.target ++++ b/Makefile.target +@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o + obj-y += memory_mapping.o + obj-y += dump.o + obj-y += migration/ram.o migration/savevm.o +-LIBS := $(libs_softmmu) $(LIBS) ++LIBS := $(libs_softmmu) $(LIBS) -lplumb + + # xen support + obj-$(CONFIG_XEN) += xen-common.o +diff --git a/migration/ram.c b/migration/ram.c +index 1eb155a..3b7a09d 100644 +--- a/migration/ram.c ++++ b/migration/ram.c +@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int +version_id) +} + + rcu_read_unlock(); +- DPRINTF("Completed load of VM with exit code %d seq iteration " ++ fprintf(stderr, "Completed load of VM with exit code %d seq iteration " + "%" PRIu64 "\n", ret, seq_iter); + return ret; + } +diff --git a/migration/savevm.c b/migration/savevm.c +index 0ad1b93..3feaa61 100644 +--- a/migration/savevm.c ++++ b/migration/savevm.c +@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f) + + } + ++#include "exec/ram_addr.h" ++#include "qemu/rcu_queue.h" ++#include <clplumbing/md5.h> ++#ifndef MD5_DIGEST_LENGTH ++#define MD5_DIGEST_LENGTH 16 ++#endif ++ ++static void check_host_md5(void) ++{ ++ int i; ++ unsigned char md[MD5_DIGEST_LENGTH]; ++ rcu_read_lock(); ++ RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check +'pc.ram' block */ ++ rcu_read_unlock(); ++ ++ MD5(block->host, block->used_length, md); ++ for(i = 0; i < MD5_DIGEST_LENGTH; i++) { ++ fprintf(stderr, "%02x", md[i]); ++ } ++ fprintf(stderr, "\n"); ++ error_report("end ram md5"); ++} ++ + void qemu_savevm_state_begin(QEMUFile *f, + const MigrationParams *params) + { +@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile +*f, bool iterable_only) +save_section_header(f, se, QEMU_VM_SECTION_END); + + ret = se->ops->save_live_complete_precopy(f, se->opaque); ++ ++ fprintf(stderr, "after saving %s complete\n", se->idstr); ++ check_host_md5(); ++ + trace_savevm_section_end(se->idstr, se->section_id, ret); + save_section_footer(f, se); + if (ret < 0) { +@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f, +MigrationIncomingState *mis) +section_id, le->se->idstr); + return ret; + } ++ if (section_type == QEMU_VM_SECTION_END) { ++ error_report("after loading state section id %d(%s)", ++ section_id, le->se->idstr); ++ check_host_md5(); ++ } + if (!check_section_footer(f, le)) { + return -EINVAL; + } +@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f) + } + + cpu_synchronize_all_post_init(); ++ error_report("%s: after cpu_synchronize_all_post_init\n", __func__); ++ check_host_md5(); + + return ret; + } + +* Li Zhijian (address@hidden) wrote: +> +Hi all, +> +> +Does anyboday remember the similar issue post by hailiang months ago +> +http://patchwork.ozlabs.org/patch/454322/ +> +At least tow bugs about migration had been fixed since that. +Yes, I wondered what happened to that. + +> +And now we found the same issue at the tcg vm(kvm is fine), after migration, +> +the content VM's memory is inconsistent. +Hmm, TCG only - I don't know much about that; but I guess something must +be accessing memory without using the proper macros/functions so +it doesn't mark it as dirty. + +> +we add a patch to check memory content, you can find it from affix +> +> +steps to reporduce: +> +1) apply the patch and re-build qemu +> +2) prepare the ubuntu guest and run memtest in grub. +> +soruce side: +> +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +> +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +> +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +> +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +> +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +> +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +> +pc-i440fx-2.3,accel=tcg,usb=off +> +> +destination side: +> +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +> +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +> +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +> +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +> +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +> +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +> +pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881 +> +> +3) start migration +> +with 1000M NIC, migration will finish within 3 min. +> +> +at source: +> +(qemu) migrate tcp:192.168.2.66:8881 +> +after saving ram complete +> +e9e725df678d392b1a83b3a917f332bb +> +qemu-system-x86_64: end ram md5 +> +(qemu) +> +> +at destination: +> +...skip... +> +Completed load of VM with exit code 0 seq iteration 1264 +> +Completed load of VM with exit code 0 seq iteration 1265 +> +Completed load of VM with exit code 0 seq iteration 1266 +> +qemu-system-x86_64: after loading state section id 2(ram) +> +49c2dac7bde0e5e22db7280dcb3824f9 +> +qemu-system-x86_64: end ram md5 +> +qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init +> +> +49c2dac7bde0e5e22db7280dcb3824f9 +> +qemu-system-x86_64: end ram md5 +> +> +This occurs occasionally and only at tcg machine. It seems that +> +some pages dirtied in source side don't transferred to destination. +> +This problem can be reproduced even if we disable virtio. +> +> +Is it OK for some pages that not transferred to destination when do +> +migration ? Or is it a bug? +I'm pretty sure that means it's a bug. Hard to find though, I guess +at least memtest is smaller than a big OS. I think I'd dump the whole +of memory on both sides, hexdump and diff them - I'd guess it would +just be one byte/word different, maybe that would offer some idea what +wrote it. + +Dave + +> +Any idea... +> +> +=================md5 check patch============================= +> +> +diff --git a/Makefile.target b/Makefile.target +> +index 962d004..e2cb8e9 100644 +> +--- a/Makefile.target +> ++++ b/Makefile.target +> +@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o +> +obj-y += memory_mapping.o +> +obj-y += dump.o +> +obj-y += migration/ram.o migration/savevm.o +> +-LIBS := $(libs_softmmu) $(LIBS) +> ++LIBS := $(libs_softmmu) $(LIBS) -lplumb +> +> +# xen support +> +obj-$(CONFIG_XEN) += xen-common.o +> +diff --git a/migration/ram.c b/migration/ram.c +> +index 1eb155a..3b7a09d 100644 +> +--- a/migration/ram.c +> ++++ b/migration/ram.c +> +@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int +> +version_id) +> +} +> +> +rcu_read_unlock(); +> +- DPRINTF("Completed load of VM with exit code %d seq iteration " +> ++ fprintf(stderr, "Completed load of VM with exit code %d seq iteration " +> +"%" PRIu64 "\n", ret, seq_iter); +> +return ret; +> +} +> +diff --git a/migration/savevm.c b/migration/savevm.c +> +index 0ad1b93..3feaa61 100644 +> +--- a/migration/savevm.c +> ++++ b/migration/savevm.c +> +@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f) +> +> +} +> +> ++#include "exec/ram_addr.h" +> ++#include "qemu/rcu_queue.h" +> ++#include <clplumbing/md5.h> +> ++#ifndef MD5_DIGEST_LENGTH +> ++#define MD5_DIGEST_LENGTH 16 +> ++#endif +> ++ +> ++static void check_host_md5(void) +> ++{ +> ++ int i; +> ++ unsigned char md[MD5_DIGEST_LENGTH]; +> ++ rcu_read_lock(); +> ++ RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check +> +'pc.ram' block */ +> ++ rcu_read_unlock(); +> ++ +> ++ MD5(block->host, block->used_length, md); +> ++ for(i = 0; i < MD5_DIGEST_LENGTH; i++) { +> ++ fprintf(stderr, "%02x", md[i]); +> ++ } +> ++ fprintf(stderr, "\n"); +> ++ error_report("end ram md5"); +> ++} +> ++ +> +void qemu_savevm_state_begin(QEMUFile *f, +> +const MigrationParams *params) +> +{ +> +@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f, +> +bool iterable_only) +> +save_section_header(f, se, QEMU_VM_SECTION_END); +> +> +ret = se->ops->save_live_complete_precopy(f, se->opaque); +> ++ +> ++ fprintf(stderr, "after saving %s complete\n", se->idstr); +> ++ check_host_md5(); +> ++ +> +trace_savevm_section_end(se->idstr, se->section_id, ret); +> +save_section_footer(f, se); +> +if (ret < 0) { +> +@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f, +> +MigrationIncomingState *mis) +> +section_id, le->se->idstr); +> +return ret; +> +} +> ++ if (section_type == QEMU_VM_SECTION_END) { +> ++ error_report("after loading state section id %d(%s)", +> ++ section_id, le->se->idstr); +> ++ check_host_md5(); +> ++ } +> +if (!check_section_footer(f, le)) { +> +return -EINVAL; +> +} +> +@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f) +> +} +> +> +cpu_synchronize_all_post_init(); +> ++ error_report("%s: after cpu_synchronize_all_post_init\n", __func__); +> ++ check_host_md5(); +> +> +return ret; +> +} +> +> +> +-- +Dr. David Alan Gilbert / address@hidden / Manchester, UK + +On 2015/12/3 17:24, Dr. David Alan Gilbert wrote: +* Li Zhijian (address@hidden) wrote: +Hi all, + +Does anyboday remember the similar issue post by hailiang months ago +http://patchwork.ozlabs.org/patch/454322/ +At least tow bugs about migration had been fixed since that. +Yes, I wondered what happened to that. +And now we found the same issue at the tcg vm(kvm is fine), after migration, +the content VM's memory is inconsistent. +Hmm, TCG only - I don't know much about that; but I guess something must +be accessing memory without using the proper macros/functions so +it doesn't mark it as dirty. +we add a patch to check memory content, you can find it from affix + +steps to reporduce: +1) apply the patch and re-build qemu +2) prepare the ubuntu guest and run memtest in grub. +soruce side: +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +pc-i440fx-2.3,accel=tcg,usb=off + +destination side: +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881 + +3) start migration +with 1000M NIC, migration will finish within 3 min. + +at source: +(qemu) migrate tcp:192.168.2.66:8881 +after saving ram complete +e9e725df678d392b1a83b3a917f332bb +qemu-system-x86_64: end ram md5 +(qemu) + +at destination: +...skip... +Completed load of VM with exit code 0 seq iteration 1264 +Completed load of VM with exit code 0 seq iteration 1265 +Completed load of VM with exit code 0 seq iteration 1266 +qemu-system-x86_64: after loading state section id 2(ram) +49c2dac7bde0e5e22db7280dcb3824f9 +qemu-system-x86_64: end ram md5 +qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init + +49c2dac7bde0e5e22db7280dcb3824f9 +qemu-system-x86_64: end ram md5 + +This occurs occasionally and only at tcg machine. It seems that +some pages dirtied in source side don't transferred to destination. +This problem can be reproduced even if we disable virtio. + +Is it OK for some pages that not transferred to destination when do +migration ? Or is it a bug? +I'm pretty sure that means it's a bug. Hard to find though, I guess +at least memtest is smaller than a big OS. I think I'd dump the whole +of memory on both sides, hexdump and diff them - I'd guess it would +just be one byte/word different, maybe that would offer some idea what +wrote it. +Maybe one better way to do that is with the help of userfaultfd's write-protect +capability. It is still in the development by Andrea Arcangeli, but there +is a RFC version available, please refer to +http://www.spinics.net/lists/linux-mm/msg97422.html +ï¼I'm developing live memory snapshot which based on it, maybe this is another +scene where we +can use userfaultfd's WP ;) ). +Dave +Any idea... + +=================md5 check patch============================= + +diff --git a/Makefile.target b/Makefile.target +index 962d004..e2cb8e9 100644 +--- a/Makefile.target ++++ b/Makefile.target +@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o + obj-y += memory_mapping.o + obj-y += dump.o + obj-y += migration/ram.o migration/savevm.o +-LIBS := $(libs_softmmu) $(LIBS) ++LIBS := $(libs_softmmu) $(LIBS) -lplumb + + # xen support + obj-$(CONFIG_XEN) += xen-common.o +diff --git a/migration/ram.c b/migration/ram.c +index 1eb155a..3b7a09d 100644 +--- a/migration/ram.c ++++ b/migration/ram.c +@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int +version_id) + } + + rcu_read_unlock(); +- DPRINTF("Completed load of VM with exit code %d seq iteration " ++ fprintf(stderr, "Completed load of VM with exit code %d seq iteration " + "%" PRIu64 "\n", ret, seq_iter); + return ret; + } +diff --git a/migration/savevm.c b/migration/savevm.c +index 0ad1b93..3feaa61 100644 +--- a/migration/savevm.c ++++ b/migration/savevm.c +@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f) + + } + ++#include "exec/ram_addr.h" ++#include "qemu/rcu_queue.h" ++#include <clplumbing/md5.h> ++#ifndef MD5_DIGEST_LENGTH ++#define MD5_DIGEST_LENGTH 16 ++#endif ++ ++static void check_host_md5(void) ++{ ++ int i; ++ unsigned char md[MD5_DIGEST_LENGTH]; ++ rcu_read_lock(); ++ RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check +'pc.ram' block */ ++ rcu_read_unlock(); ++ ++ MD5(block->host, block->used_length, md); ++ for(i = 0; i < MD5_DIGEST_LENGTH; i++) { ++ fprintf(stderr, "%02x", md[i]); ++ } ++ fprintf(stderr, "\n"); ++ error_report("end ram md5"); ++} ++ + void qemu_savevm_state_begin(QEMUFile *f, + const MigrationParams *params) + { +@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f, +bool iterable_only) + save_section_header(f, se, QEMU_VM_SECTION_END); + + ret = se->ops->save_live_complete_precopy(f, se->opaque); ++ ++ fprintf(stderr, "after saving %s complete\n", se->idstr); ++ check_host_md5(); ++ + trace_savevm_section_end(se->idstr, se->section_id, ret); + save_section_footer(f, se); + if (ret < 0) { +@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f, +MigrationIncomingState *mis) + section_id, le->se->idstr); + return ret; + } ++ if (section_type == QEMU_VM_SECTION_END) { ++ error_report("after loading state section id %d(%s)", ++ section_id, le->se->idstr); ++ check_host_md5(); ++ } + if (!check_section_footer(f, le)) { + return -EINVAL; + } +@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f) + } + + cpu_synchronize_all_post_init(); ++ error_report("%s: after cpu_synchronize_all_post_init\n", __func__); ++ check_host_md5(); + + return ret; + } +-- +Dr. David Alan Gilbert / address@hidden / Manchester, UK + +. + +On 12/03/2015 05:37 PM, Hailiang Zhang wrote: +On 2015/12/3 17:24, Dr. David Alan Gilbert wrote: +* Li Zhijian (address@hidden) wrote: +Hi all, + +Does anyboday remember the similar issue post by hailiang months ago +http://patchwork.ozlabs.org/patch/454322/ +At least tow bugs about migration had been fixed since that. +Yes, I wondered what happened to that. +And now we found the same issue at the tcg vm(kvm is fine), after +migration, +the content VM's memory is inconsistent. +Hmm, TCG only - I don't know much about that; but I guess something must +be accessing memory without using the proper macros/functions so +it doesn't mark it as dirty. +we add a patch to check memory content, you can find it from affix + +steps to reporduce: +1) apply the patch and re-build qemu +2) prepare the ubuntu guest and run memtest in grub. +soruce side: +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 + +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +pc-i440fx-2.3,accel=tcg,usb=off + +destination side: +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 + +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881 + +3) start migration +with 1000M NIC, migration will finish within 3 min. + +at source: +(qemu) migrate tcp:192.168.2.66:8881 +after saving ram complete +e9e725df678d392b1a83b3a917f332bb +qemu-system-x86_64: end ram md5 +(qemu) + +at destination: +...skip... +Completed load of VM with exit code 0 seq iteration 1264 +Completed load of VM with exit code 0 seq iteration 1265 +Completed load of VM with exit code 0 seq iteration 1266 +qemu-system-x86_64: after loading state section id 2(ram) +49c2dac7bde0e5e22db7280dcb3824f9 +qemu-system-x86_64: end ram md5 +qemu-system-x86_64: qemu_loadvm_state: after +cpu_synchronize_all_post_init + +49c2dac7bde0e5e22db7280dcb3824f9 +qemu-system-x86_64: end ram md5 + +This occurs occasionally and only at tcg machine. It seems that +some pages dirtied in source side don't transferred to destination. +This problem can be reproduced even if we disable virtio. + +Is it OK for some pages that not transferred to destination when do +migration ? Or is it a bug? +I'm pretty sure that means it's a bug. Hard to find though, I guess +at least memtest is smaller than a big OS. I think I'd dump the whole +of memory on both sides, hexdump and diff them - I'd guess it would +just be one byte/word different, maybe that would offer some idea what +wrote it. +Maybe one better way to do that is with the help of userfaultfd's +write-protect +capability. It is still in the development by Andrea Arcangeli, but there +is a RFC version available, please refer to +http://www.spinics.net/lists/linux-mm/msg97422.html +ï¼I'm developing live memory snapshot which based on it, maybe this is +another scene where we +can use userfaultfd's WP ;) ). +sounds good. + +thanks +Li +Dave +Any idea... + +=================md5 check patch============================= + +diff --git a/Makefile.target b/Makefile.target +index 962d004..e2cb8e9 100644 +--- a/Makefile.target ++++ b/Makefile.target +@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o + obj-y += memory_mapping.o + obj-y += dump.o + obj-y += migration/ram.o migration/savevm.o +-LIBS := $(libs_softmmu) $(LIBS) ++LIBS := $(libs_softmmu) $(LIBS) -lplumb + + # xen support + obj-$(CONFIG_XEN) += xen-common.o +diff --git a/migration/ram.c b/migration/ram.c +index 1eb155a..3b7a09d 100644 +--- a/migration/ram.c ++++ b/migration/ram.c +@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int +version_id) + } + + rcu_read_unlock(); +- DPRINTF("Completed load of VM with exit code %d seq iteration " ++ fprintf(stderr, "Completed load of VM with exit code %d seq +iteration " + "%" PRIu64 "\n", ret, seq_iter); + return ret; + } +diff --git a/migration/savevm.c b/migration/savevm.c +index 0ad1b93..3feaa61 100644 +--- a/migration/savevm.c ++++ b/migration/savevm.c +@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f) + + } + ++#include "exec/ram_addr.h" ++#include "qemu/rcu_queue.h" ++#include <clplumbing/md5.h> ++#ifndef MD5_DIGEST_LENGTH ++#define MD5_DIGEST_LENGTH 16 ++#endif ++ ++static void check_host_md5(void) ++{ ++ int i; ++ unsigned char md[MD5_DIGEST_LENGTH]; ++ rcu_read_lock(); ++ RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check +'pc.ram' block */ ++ rcu_read_unlock(); ++ ++ MD5(block->host, block->used_length, md); ++ for(i = 0; i < MD5_DIGEST_LENGTH; i++) { ++ fprintf(stderr, "%02x", md[i]); ++ } ++ fprintf(stderr, "\n"); ++ error_report("end ram md5"); ++} ++ + void qemu_savevm_state_begin(QEMUFile *f, + const MigrationParams *params) + { +@@ -1056,6 +1079,10 @@ void +qemu_savevm_state_complete_precopy(QEMUFile *f, +bool iterable_only) + save_section_header(f, se, QEMU_VM_SECTION_END); + + ret = se->ops->save_live_complete_precopy(f, se->opaque); ++ ++ fprintf(stderr, "after saving %s complete\n", se->idstr); ++ check_host_md5(); ++ + trace_savevm_section_end(se->idstr, se->section_id, ret); + save_section_footer(f, se); + if (ret < 0) { +@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f, +MigrationIncomingState *mis) + section_id, le->se->idstr); + return ret; + } ++ if (section_type == QEMU_VM_SECTION_END) { ++ error_report("after loading state section id %d(%s)", ++ section_id, le->se->idstr); ++ check_host_md5(); ++ } + if (!check_section_footer(f, le)) { + return -EINVAL; + } +@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f) + } + + cpu_synchronize_all_post_init(); ++ error_report("%s: after cpu_synchronize_all_post_init\n", +__func__); ++ check_host_md5(); + + return ret; + } +-- +Dr. David Alan Gilbert / address@hidden / Manchester, UK + +. +. +-- +Best regards. +Li Zhijian (8555) + +On 12/03/2015 05:24 PM, Dr. David Alan Gilbert wrote: +* Li Zhijian (address@hidden) wrote: +Hi all, + +Does anyboday remember the similar issue post by hailiang months ago +http://patchwork.ozlabs.org/patch/454322/ +At least tow bugs about migration had been fixed since that. +Yes, I wondered what happened to that. +And now we found the same issue at the tcg vm(kvm is fine), after migration, +the content VM's memory is inconsistent. +Hmm, TCG only - I don't know much about that; but I guess something must +be accessing memory without using the proper macros/functions so +it doesn't mark it as dirty. +we add a patch to check memory content, you can find it from affix + +steps to reporduce: +1) apply the patch and re-build qemu +2) prepare the ubuntu guest and run memtest in grub. +soruce side: +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +pc-i440fx-2.3,accel=tcg,usb=off + +destination side: +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881 + +3) start migration +with 1000M NIC, migration will finish within 3 min. + +at source: +(qemu) migrate tcp:192.168.2.66:8881 +after saving ram complete +e9e725df678d392b1a83b3a917f332bb +qemu-system-x86_64: end ram md5 +(qemu) + +at destination: +...skip... +Completed load of VM with exit code 0 seq iteration 1264 +Completed load of VM with exit code 0 seq iteration 1265 +Completed load of VM with exit code 0 seq iteration 1266 +qemu-system-x86_64: after loading state section id 2(ram) +49c2dac7bde0e5e22db7280dcb3824f9 +qemu-system-x86_64: end ram md5 +qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init + +49c2dac7bde0e5e22db7280dcb3824f9 +qemu-system-x86_64: end ram md5 + +This occurs occasionally and only at tcg machine. It seems that +some pages dirtied in source side don't transferred to destination. +This problem can be reproduced even if we disable virtio. + +Is it OK for some pages that not transferred to destination when do +migration ? Or is it a bug? +I'm pretty sure that means it's a bug. Hard to find though, I guess +at least memtest is smaller than a big OS. I think I'd dump the whole +of memory on both sides, hexdump and diff them - I'd guess it would +just be one byte/word different, maybe that would offer some idea what +wrote it. +I try to dump and compare them, more than 10 pages are different. +in source side, they are random value rather than always 'FF' 'FB' 'EF' +'BF'... in destination. +and not all of the different pages are continuous. + +thanks +Li +Dave +Any idea... + +=================md5 check patch============================= + +diff --git a/Makefile.target b/Makefile.target +index 962d004..e2cb8e9 100644 +--- a/Makefile.target ++++ b/Makefile.target +@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o + obj-y += memory_mapping.o + obj-y += dump.o + obj-y += migration/ram.o migration/savevm.o +-LIBS := $(libs_softmmu) $(LIBS) ++LIBS := $(libs_softmmu) $(LIBS) -lplumb + + # xen support + obj-$(CONFIG_XEN) += xen-common.o +diff --git a/migration/ram.c b/migration/ram.c +index 1eb155a..3b7a09d 100644 +--- a/migration/ram.c ++++ b/migration/ram.c +@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int +version_id) + } + + rcu_read_unlock(); +- DPRINTF("Completed load of VM with exit code %d seq iteration " ++ fprintf(stderr, "Completed load of VM with exit code %d seq iteration " + "%" PRIu64 "\n", ret, seq_iter); + return ret; + } +diff --git a/migration/savevm.c b/migration/savevm.c +index 0ad1b93..3feaa61 100644 +--- a/migration/savevm.c ++++ b/migration/savevm.c +@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f) + + } + ++#include "exec/ram_addr.h" ++#include "qemu/rcu_queue.h" ++#include <clplumbing/md5.h> ++#ifndef MD5_DIGEST_LENGTH ++#define MD5_DIGEST_LENGTH 16 ++#endif ++ ++static void check_host_md5(void) ++{ ++ int i; ++ unsigned char md[MD5_DIGEST_LENGTH]; ++ rcu_read_lock(); ++ RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check +'pc.ram' block */ ++ rcu_read_unlock(); ++ ++ MD5(block->host, block->used_length, md); ++ for(i = 0; i < MD5_DIGEST_LENGTH; i++) { ++ fprintf(stderr, "%02x", md[i]); ++ } ++ fprintf(stderr, "\n"); ++ error_report("end ram md5"); ++} ++ + void qemu_savevm_state_begin(QEMUFile *f, + const MigrationParams *params) + { +@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f, +bool iterable_only) + save_section_header(f, se, QEMU_VM_SECTION_END); + + ret = se->ops->save_live_complete_precopy(f, se->opaque); ++ ++ fprintf(stderr, "after saving %s complete\n", se->idstr); ++ check_host_md5(); ++ + trace_savevm_section_end(se->idstr, se->section_id, ret); + save_section_footer(f, se); + if (ret < 0) { +@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f, +MigrationIncomingState *mis) + section_id, le->se->idstr); + return ret; + } ++ if (section_type == QEMU_VM_SECTION_END) { ++ error_report("after loading state section id %d(%s)", ++ section_id, le->se->idstr); ++ check_host_md5(); ++ } + if (!check_section_footer(f, le)) { + return -EINVAL; + } +@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f) + } + + cpu_synchronize_all_post_init(); ++ error_report("%s: after cpu_synchronize_all_post_init\n", __func__); ++ check_host_md5(); + + return ret; + } +-- +Dr. David Alan Gilbert / address@hidden / Manchester, UK + + +. +-- +Best regards. +Li Zhijian (8555) + +* Li Zhijian (address@hidden) wrote: +> +> +> +On 12/03/2015 05:24 PM, Dr. David Alan Gilbert wrote: +> +>* Li Zhijian (address@hidden) wrote: +> +>>Hi all, +> +>> +> +>>Does anyboday remember the similar issue post by hailiang months ago +> +>> +http://patchwork.ozlabs.org/patch/454322/ +> +>>At least tow bugs about migration had been fixed since that. +> +> +> +>Yes, I wondered what happened to that. +> +> +> +>>And now we found the same issue at the tcg vm(kvm is fine), after migration, +> +>>the content VM's memory is inconsistent. +> +> +> +>Hmm, TCG only - I don't know much about that; but I guess something must +> +>be accessing memory without using the proper macros/functions so +> +>it doesn't mark it as dirty. +> +> +> +>>we add a patch to check memory content, you can find it from affix +> +>> +> +>>steps to reporduce: +> +>>1) apply the patch and re-build qemu +> +>>2) prepare the ubuntu guest and run memtest in grub. +> +>>soruce side: +> +>>x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +> +>>e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +> +>>if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +> +>>virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +> +>>-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +> +>>tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +> +>>pc-i440fx-2.3,accel=tcg,usb=off +> +>> +> +>>destination side: +> +>>x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +> +>>e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +> +>>if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +> +>>virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +> +>>-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +> +>>tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +> +>>pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881 +> +>> +> +>>3) start migration +> +>>with 1000M NIC, migration will finish within 3 min. +> +>> +> +>>at source: +> +>>(qemu) migrate tcp:192.168.2.66:8881 +> +>>after saving ram complete +> +>>e9e725df678d392b1a83b3a917f332bb +> +>>qemu-system-x86_64: end ram md5 +> +>>(qemu) +> +>> +> +>>at destination: +> +>>...skip... +> +>>Completed load of VM with exit code 0 seq iteration 1264 +> +>>Completed load of VM with exit code 0 seq iteration 1265 +> +>>Completed load of VM with exit code 0 seq iteration 1266 +> +>>qemu-system-x86_64: after loading state section id 2(ram) +> +>>49c2dac7bde0e5e22db7280dcb3824f9 +> +>>qemu-system-x86_64: end ram md5 +> +>>qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init +> +>> +> +>>49c2dac7bde0e5e22db7280dcb3824f9 +> +>>qemu-system-x86_64: end ram md5 +> +>> +> +>>This occurs occasionally and only at tcg machine. It seems that +> +>>some pages dirtied in source side don't transferred to destination. +> +>>This problem can be reproduced even if we disable virtio. +> +>> +> +>>Is it OK for some pages that not transferred to destination when do +> +>>migration ? Or is it a bug? +> +> +> +>I'm pretty sure that means it's a bug. Hard to find though, I guess +> +>at least memtest is smaller than a big OS. I think I'd dump the whole +> +>of memory on both sides, hexdump and diff them - I'd guess it would +> +>just be one byte/word different, maybe that would offer some idea what +> +>wrote it. +> +> +I try to dump and compare them, more than 10 pages are different. +> +in source side, they are random value rather than always 'FF' 'FB' 'EF' +> +'BF'... in destination. +> +> +and not all of the different pages are continuous. +I wonder if it happens on all of memtest's different test patterns, +perhaps it might be possible to narrow it down if you tell memtest +to only run one test at a time. + +Dave + +> +> +thanks +> +Li +> +> +> +> +> +>Dave +> +> +> +>>Any idea... +> +>> +> +>>=================md5 check patch============================= +> +>> +> +>>diff --git a/Makefile.target b/Makefile.target +> +>>index 962d004..e2cb8e9 100644 +> +>>--- a/Makefile.target +> +>>+++ b/Makefile.target +> +>>@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o +> +>> obj-y += memory_mapping.o +> +>> obj-y += dump.o +> +>> obj-y += migration/ram.o migration/savevm.o +> +>>-LIBS := $(libs_softmmu) $(LIBS) +> +>>+LIBS := $(libs_softmmu) $(LIBS) -lplumb +> +>> +> +>> # xen support +> +>> obj-$(CONFIG_XEN) += xen-common.o +> +>>diff --git a/migration/ram.c b/migration/ram.c +> +>>index 1eb155a..3b7a09d 100644 +> +>>--- a/migration/ram.c +> +>>+++ b/migration/ram.c +> +>>@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, int +> +>>version_id) +> +>> } +> +>> +> +>> rcu_read_unlock(); +> +>>- DPRINTF("Completed load of VM with exit code %d seq iteration " +> +>>+ fprintf(stderr, "Completed load of VM with exit code %d seq iteration " +> +>> "%" PRIu64 "\n", ret, seq_iter); +> +>> return ret; +> +>> } +> +>>diff --git a/migration/savevm.c b/migration/savevm.c +> +>>index 0ad1b93..3feaa61 100644 +> +>>--- a/migration/savevm.c +> +>>+++ b/migration/savevm.c +> +>>@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f) +> +>> +> +>> } +> +>> +> +>>+#include "exec/ram_addr.h" +> +>>+#include "qemu/rcu_queue.h" +> +>>+#include <clplumbing/md5.h> +> +>>+#ifndef MD5_DIGEST_LENGTH +> +>>+#define MD5_DIGEST_LENGTH 16 +> +>>+#endif +> +>>+ +> +>>+static void check_host_md5(void) +> +>>+{ +> +>>+ int i; +> +>>+ unsigned char md[MD5_DIGEST_LENGTH]; +> +>>+ rcu_read_lock(); +> +>>+ RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check +> +>>'pc.ram' block */ +> +>>+ rcu_read_unlock(); +> +>>+ +> +>>+ MD5(block->host, block->used_length, md); +> +>>+ for(i = 0; i < MD5_DIGEST_LENGTH; i++) { +> +>>+ fprintf(stderr, "%02x", md[i]); +> +>>+ } +> +>>+ fprintf(stderr, "\n"); +> +>>+ error_report("end ram md5"); +> +>>+} +> +>>+ +> +>> void qemu_savevm_state_begin(QEMUFile *f, +> +>> const MigrationParams *params) +> +>> { +> +>>@@ -1056,6 +1079,10 @@ void qemu_savevm_state_complete_precopy(QEMUFile *f, +> +>>bool iterable_only) +> +>> save_section_header(f, se, QEMU_VM_SECTION_END); +> +>> +> +>> ret = se->ops->save_live_complete_precopy(f, se->opaque); +> +>>+ +> +>>+ fprintf(stderr, "after saving %s complete\n", se->idstr); +> +>>+ check_host_md5(); +> +>>+ +> +>> trace_savevm_section_end(se->idstr, se->section_id, ret); +> +>> save_section_footer(f, se); +> +>> if (ret < 0) { +> +>>@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f, +> +>>MigrationIncomingState *mis) +> +>> section_id, le->se->idstr); +> +>> return ret; +> +>> } +> +>>+ if (section_type == QEMU_VM_SECTION_END) { +> +>>+ error_report("after loading state section id %d(%s)", +> +>>+ section_id, le->se->idstr); +> +>>+ check_host_md5(); +> +>>+ } +> +>> if (!check_section_footer(f, le)) { +> +>> return -EINVAL; +> +>> } +> +>>@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f) +> +>> } +> +>> +> +>> cpu_synchronize_all_post_init(); +> +>>+ error_report("%s: after cpu_synchronize_all_post_init\n", __func__); +> +>>+ check_host_md5(); +> +>> +> +>> return ret; +> +>> } +> +>> +> +>> +> +>> +> +>-- +> +>Dr. David Alan Gilbert / address@hidden / Manchester, UK +> +> +> +> +> +>. +> +> +> +> +-- +> +Best regards. +> +Li Zhijian (8555) +> +> +-- +Dr. David Alan Gilbert / address@hidden / Manchester, UK + +Li Zhijian <address@hidden> wrote: +> +Hi all, +> +> +Does anyboday remember the similar issue post by hailiang months ago +> +http://patchwork.ozlabs.org/patch/454322/ +> +At least tow bugs about migration had been fixed since that. +> +> +And now we found the same issue at the tcg vm(kvm is fine), after +> +migration, the content VM's memory is inconsistent. +> +> +we add a patch to check memory content, you can find it from affix +> +> +steps to reporduce: +> +1) apply the patch and re-build qemu +> +2) prepare the ubuntu guest and run memtest in grub. +> +soruce side: +> +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +> +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +> +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +> +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +> +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +> +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +> +pc-i440fx-2.3,accel=tcg,usb=off +> +> +destination side: +> +x86_64-softmmu/qemu-system-x86_64 -netdev tap,id=hn0 -device +> +e1000,id=net-pci0,netdev=hn0,mac=52:54:00:12:34:65 -boot c -drive +> +if=none,file=/home/lizj/ubuntu.raw,id=drive-virtio-disk0 -device +> +virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 +> +-vnc :7 -m 128 -smp 1 -device piix3-usb-uhci -device usb-tablet -qmp +> +tcp::4444,server,nowait -monitor stdio -cpu qemu64 -machine +> +pc-i440fx-2.3,accel=tcg,usb=off -incoming tcp:0:8881 +> +> +3) start migration +> +with 1000M NIC, migration will finish within 3 min. +> +> +at source: +> +(qemu) migrate tcp:192.168.2.66:8881 +> +after saving ram complete +> +e9e725df678d392b1a83b3a917f332bb +> +qemu-system-x86_64: end ram md5 +> +(qemu) +> +> +at destination: +> +...skip... +> +Completed load of VM with exit code 0 seq iteration 1264 +> +Completed load of VM with exit code 0 seq iteration 1265 +> +Completed load of VM with exit code 0 seq iteration 1266 +> +qemu-system-x86_64: after loading state section id 2(ram) +> +49c2dac7bde0e5e22db7280dcb3824f9 +> +qemu-system-x86_64: end ram md5 +> +qemu-system-x86_64: qemu_loadvm_state: after cpu_synchronize_all_post_init +> +> +49c2dac7bde0e5e22db7280dcb3824f9 +> +qemu-system-x86_64: end ram md5 +> +> +This occurs occasionally and only at tcg machine. It seems that +> +some pages dirtied in source side don't transferred to destination. +> +This problem can be reproduced even if we disable virtio. +> +> +Is it OK for some pages that not transferred to destination when do +> +migration ? Or is it a bug? +> +> +Any idea... +Thanks for describing how to reproduce the bug. +If some pages are not transferred to destination then it is a bug, so we +need to know what the problem is, notice that the problem can be that +TCG is not marking dirty some page, that Migration code "forgets" about +that page, or anything eles altogether, that is what we need to find. + +There are more posibilities, I am not sure that memtest is on 32bit +mode, and it is inside posibility that we are missing some state when we +are on real mode. + +Will try to take a look at this. + +THanks, again. + + +> +> +=================md5 check patch============================= +> +> +diff --git a/Makefile.target b/Makefile.target +> +index 962d004..e2cb8e9 100644 +> +--- a/Makefile.target +> ++++ b/Makefile.target +> +@@ -139,7 +139,7 @@ obj-y += memory.o cputlb.o +> +obj-y += memory_mapping.o +> +obj-y += dump.o +> +obj-y += migration/ram.o migration/savevm.o +> +-LIBS := $(libs_softmmu) $(LIBS) +> ++LIBS := $(libs_softmmu) $(LIBS) -lplumb +> +> +# xen support +> +obj-$(CONFIG_XEN) += xen-common.o +> +diff --git a/migration/ram.c b/migration/ram.c +> +index 1eb155a..3b7a09d 100644 +> +--- a/migration/ram.c +> ++++ b/migration/ram.c +> +@@ -2513,7 +2513,7 @@ static int ram_load(QEMUFile *f, void *opaque, +> +int version_id) +> +} +> +> +rcu_read_unlock(); +> +- DPRINTF("Completed load of VM with exit code %d seq iteration " +> ++ fprintf(stderr, "Completed load of VM with exit code %d seq iteration " +> +"%" PRIu64 "\n", ret, seq_iter); +> +return ret; +> +} +> +diff --git a/migration/savevm.c b/migration/savevm.c +> +index 0ad1b93..3feaa61 100644 +> +--- a/migration/savevm.c +> ++++ b/migration/savevm.c +> +@@ -891,6 +891,29 @@ void qemu_savevm_state_header(QEMUFile *f) +> +> +} +> +> ++#include "exec/ram_addr.h" +> ++#include "qemu/rcu_queue.h" +> ++#include <clplumbing/md5.h> +> ++#ifndef MD5_DIGEST_LENGTH +> ++#define MD5_DIGEST_LENGTH 16 +> ++#endif +> ++ +> ++static void check_host_md5(void) +> ++{ +> ++ int i; +> ++ unsigned char md[MD5_DIGEST_LENGTH]; +> ++ rcu_read_lock(); +> ++ RAMBlock *block = QLIST_FIRST_RCU(&ram_list.blocks);/* Only check +> +'pc.ram' block */ +> ++ rcu_read_unlock(); +> ++ +> ++ MD5(block->host, block->used_length, md); +> ++ for(i = 0; i < MD5_DIGEST_LENGTH; i++) { +> ++ fprintf(stderr, "%02x", md[i]); +> ++ } +> ++ fprintf(stderr, "\n"); +> ++ error_report("end ram md5"); +> ++} +> ++ +> +void qemu_savevm_state_begin(QEMUFile *f, +> +const MigrationParams *params) +> +{ +> +@@ -1056,6 +1079,10 @@ void +> +qemu_savevm_state_complete_precopy(QEMUFile *f, bool iterable_only) +> +save_section_header(f, se, QEMU_VM_SECTION_END); +> +> +ret = se->ops->save_live_complete_precopy(f, se->opaque); +> ++ +> ++ fprintf(stderr, "after saving %s complete\n", se->idstr); +> ++ check_host_md5(); +> ++ +> +trace_savevm_section_end(se->idstr, se->section_id, ret); +> +save_section_footer(f, se); +> +if (ret < 0) { +> +@@ -1791,6 +1818,11 @@ static int qemu_loadvm_state_main(QEMUFile *f, +> +MigrationIncomingState *mis) +> +section_id, le->se->idstr); +> +return ret; +> +} +> ++ if (section_type == QEMU_VM_SECTION_END) { +> ++ error_report("after loading state section id %d(%s)", +> ++ section_id, le->se->idstr); +> ++ check_host_md5(); +> ++ } +> +if (!check_section_footer(f, le)) { +> +return -EINVAL; +> +} +> +@@ -1901,6 +1933,8 @@ int qemu_loadvm_state(QEMUFile *f) +> +} +> +> +cpu_synchronize_all_post_init(); +> ++ error_report("%s: after cpu_synchronize_all_post_init\n", __func__); +> ++ check_host_md5(); +> +> +return ret; +> +} + +> +> +Thanks for describing how to reproduce the bug. +> +If some pages are not transferred to destination then it is a bug, so we need +> +to know what the problem is, notice that the problem can be that TCG is not +> +marking dirty some page, that Migration code "forgets" about that page, or +> +anything eles altogether, that is what we need to find. +> +> +There are more posibilities, I am not sure that memtest is on 32bit mode, and +> +it is inside posibility that we are missing some state when we are on real +> +mode. +> +> +Will try to take a look at this. +> +> +THanks, again. +> +Hi Juan & Amit + + Do you think we should add a mechanism to check the data integrity during LM +like Zhijian's patch did? it may be very helpful for developers. + Actually, I did the similar thing before in order to make sure that I did the +right thing we I change the code related to LM. + +Liang + +On (Fri) 04 Dec 2015 [01:43:07], Li, Liang Z wrote: +> +> +> +> Thanks for describing how to reproduce the bug. +> +> If some pages are not transferred to destination then it is a bug, so we +> +> need +> +> to know what the problem is, notice that the problem can be that TCG is not +> +> marking dirty some page, that Migration code "forgets" about that page, or +> +> anything eles altogether, that is what we need to find. +> +> +> +> There are more posibilities, I am not sure that memtest is on 32bit mode, +> +> and +> +> it is inside posibility that we are missing some state when we are on real +> +> mode. +> +> +> +> Will try to take a look at this. +> +> +> +> THanks, again. +> +> +> +> +Hi Juan & Amit +> +> +Do you think we should add a mechanism to check the data integrity during LM +> +like Zhijian's patch did? it may be very helpful for developers. +> +Actually, I did the similar thing before in order to make sure that I did +> +the right thing we I change the code related to LM. +If you mean for debugging, something that's not always on, then I'm +fine with it. + +A script that goes along that shows the result of comparison of the +diff will be helpful too, something that shows how many pages are +differnt, how many bytes in a page on average, and so on. + + Amit + |