1 files changed, 87 insertions, 0 deletions
diff --git a/results/classifier/118/device/1927408 b/results/classifier/118/device/1927408
new file mode 100644
index 000000000..6ca282928
--- /dev/null
+++ b/results/classifier/118/device/1927408
@@ -0,0 +1,87 @@
+device: 0.911
+mistranslation: 0.892
+network: 0.833
+performance: 0.826
+user-level: 0.821
+graphic: 0.807
+peripherals: 0.791
+PID: 0.790
+socket: 0.779
+i386: 0.733
+permissions: 0.696
+semantic: 0.693
+vnc: 0.669
+x86: 0.668
+files: 0.667
+risc-v: 0.659
+register: 0.657
+kernel: 0.605
+ppc: 0.595
+boot: 0.569
+TCG: 0.539
+architecture: 0.536
+VMM: 0.532
+KVM: 0.515
+hypervisor: 0.456
+debug: 0.394
+virtual: 0.391
+assembly: 0.368
+arm: 0.343
+
+USB Ethernet device (RNDIS) does not work on several tested operating systems
+
+The USB ethernet device does not work on most versions of operating systems I have tested. For each operating system the command to use this device was: -netdev user,id=mynet1 -device usb-net,netdev=mynet1.
+
+
+Windows 2000 (qemu-system-i386):
+- failed to load a driver for the device
+
+
+Windows 7 (qemu-system-x86_64):
+- Did not find a driver
+- Followed the directions here: https://developer.toradex.com/knowledge-base/how-to-install-microsoft-rndis-driver-for-windows-7
+-- The device failed to start with error 10.
+- Did see this message in the terminal on the host: 
+usbnet: failed control transaction: request 0x8006 value 0x600 index 0x0 length 0xa
+
+
+Mac OS 10.4.11 (qemu-system-ppc):
+- It actually works.
+- did see these messages in the terminal on the host:
+usbnet: failed control transaction: request 0x2143 value 0x1c index 0x0 length 0x0
+usbnet: failed control transaction: request 0x2143 value 0x1e index 0x0 length 0x0
+
+
+Mac OS 10.8.5 (qemu-system-x86_64):
+- Fails to obtain IP address using DHCP.
+- The Network pane does say the device is connected. 
+- A self-assigned IP address is given: 169.254.186.53.
+-- It still did not work
+- Did see this message in the terminal of the host:
+usbnet: failed control transaction: request 0x2143 value 0x1c index 0x0 length 0x0
+usbnet: failed control transaction: request 0x2143 value 0x1e index 0x0 length 0x0
+
+
+Mac OS 10.2.3 (qemu-system-ppc):
+- Did not appear to detect the USB NIC. Did not see it in the network pane.
+- Apple System Profiler does see this device.
+- Saw this message in there terminal of the host: qemu-system-ppc: Slirp: Failed to send packet, ret: -1
+
+
+Mac OS 9.2 (qemu-system-ppc):
+- Apple System Profiler does show the device connected.
+- The Tcp/ip control panel did not detect this device.
+
+
+My guess is this device is buggy. If anyone has any tips or suggestions please let me know.
+
+Thank you.
+
+Please do not open new tickets in the Launchpad bug tracker. Use the gitlab issue tracker now instead:
+
+  https://gitlab.com/qemu-project/qemu/-/issues
+
+See https://gitlab.com/qemu-project/qemu/-/issues/198 for further updates.
+
+Thanks for re-opening it there!
+