1 files changed, 70 insertions, 0 deletions
diff --git a/results/classifier/gemma3:12b/assembly/2422 b/results/classifier/gemma3:12b/assembly/2422
new file mode 100644
index 000000000..b8141c734
--- /dev/null
+++ b/results/classifier/gemma3:12b/assembly/2422
@@ -0,0 +1,70 @@
+
+`vill` not set after reserved `vsetvli` instruction usage
+Description of problem:
+The ["AVL encoding" section of the RISC-V V Spec 1.0](https://github.com/riscv/riscv-isa-manual/blob/main/src/v-st-ext.adoc#avl-encoding) states that a `vsetvli  x0,x0,...` that changes VLMAX is reserved and "Implementations may set `vill`" in this case. QEMU does not set `vill` in this case. Doing so would help detect code generation issues and non-portable code.
+
+Here is the quote from the spec:
+
+> When `rs1=x0` and `rd=x0`, the instruction operates as if the current
+> vector length in `vl` is used as the AVL, and the resulting value is
+> written to `vl`, but not to a destination register.  This form can
+> only be used when VLMAX and hence `vl` is not actually changed by the
+> new SEW/LMUL ratio.  Use of the instruction with a new SEW/LMUL ratio
+> that would result in a change of VLMAX is reserved.
+> Use of the instruction is also reserved if `vill` was 1 beforehand.
+> Implementations may set `vill` in either case.
+
+Note, I have not checked QEMU's behaviour for the other case mentioned in the quote: "Use of the instruction is also reserved if `vill` was 1 beforehand".
+Steps to reproduce:
+1. Create `test.c`
+```C
+#include <assert.h>
+
+/* Position of vill in vtype.  */
+
+#define VILL_BIT (__riscv_xlen - 1)
+
+/* Return true if vill is 1.  */
+
+int vill_set_p ()
+{
+  __UINT64_TYPE__ vtype;
+  asm volatile ("csrr %0, vtype" : "=r"(vtype));
+
+  return (vtype >> VILL_BIT) & 1;
+}
+
+/* Return true if vill is 0.  */
+
+int vill_clear_p ()
+{
+  return !vill_set_p ();
+}
+
+int main ()
+{
+  int vl;
+
+  assert (vill_clear_p ());
+
+  /* Valid: vl = VLMAX.  */
+  asm volatile ("vsetvli %0,zero,e64,m8,ta,ma\n" : "=r"(vl));
+  assert (vill_clear_p ());
+
+  /* Valid: vl and VLMAX not changed.  */
+  asm volatile ("vsetvli zero,zero,e64,m8,ta,ma\n");
+  assert (vill_clear_p ());
+
+  /* Reserved: Reduce VLMAX.  */
+  asm volatile ("vsetvli zero,zero,e64,m1,ta,ma\n");
+  assert (vill_set_p ());
+
+  return 0;
+}
+```
+2. Build `test.c` with `riscv32-unknown-elf-gcc test.c -o test -march=rv64gcv -mabi=lp64d`
+3. Run qemu with `qemu-riscv64 -cpu rv64,v=true test`
+4. The final assertion fails because executing the reserved `vsetvli` did not set `vill`
+```
+assertion "vill_set_p ()" failed: file "test.c", line 40, function: main
+```