diff options
Diffstat (limited to 'results/classifier/zero-shot/105/other/1603636')
| -rw-r--r-- | results/classifier/zero-shot/105/other/1603636 | 490 |
1 files changed, 490 insertions, 0 deletions
diff --git a/results/classifier/zero-shot/105/other/1603636 b/results/classifier/zero-shot/105/other/1603636 new file mode 100644 index 000000000..7d24108a6 --- /dev/null +++ b/results/classifier/zero-shot/105/other/1603636 @@ -0,0 +1,490 @@ +other: 0.802 +graphic: 0.779 +semantic: 0.733 +KVM: 0.729 +network: 0.721 +device: 0.715 +socket: 0.708 +instruction: 0.689 +boot: 0.638 +vnc: 0.636 +assembly: 0.631 +mistranslation: 0.504 + +Guest has not initialized the display yet on ubuntu 16.10 PPC + +Hi +tested with all kind of configure, with all kind of machine types but i have the same issue ... +on lastest quemo 2.6 "Guest has not initialized the display yet" +note with lastest git repository the situation become worst because on i386-softmmu i have the message but qemu exit alone because looklike there is not a bios + +this is gdb of i386-softmmu + +(gdb) run +Starting program: /home/amigaone/src/qemu/i386-softmmu/qemu-system-i386 +[Thread debugging using libthread_db enabled] +Using host libthread_db library "/lib/powerpc-linux-gnu/libthread_db.so.1". +[New Thread 0xf7f78b70 (LWP 25074)] +[New Thread 0xf770bb70 (LWP 25075)] +[New Thread 0xf6dfdb70 (LWP 25076)] +[New Thread 0xf65fdb70 (LWP 25077)] +[New Thread 0xf3337b70 (LWP 25078)] +[New Thread 0xe4146b70 (LWP 25087)] +qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000 +This usually means one of the following happened: + +(1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine) +(2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end +(3) Your guest kernel has a bug and crashed by jumping off into nowhere + +This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine. +If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point. + +Execution cannot continue; stopping here. + +[Thread 0xe4146b70 (LWP 25087) exited] +[Thread 0xf65fdb70 (LWP 25077) exited] +[Thread 0xf6dfdb70 (LWP 25076) exited] +[Thread 0xf770bb70 (LWP 25075) exited] +[Thread 0xf7f78b70 (LWP 25074) exited] +[Thread 0xf7f7c000 (LWP 25070) exited] +[Inferior 1 (process 25070) exited with code 01] + + +this is my ldd +ldd ./qemu-system-i386 + linux-vdso32.so.1 => (0x00100000) + libvirglrenderer.so.0 => /usr/local/lib/libvirglrenderer.so.0 (0x0ff8a000) + libepoxy.so.0 => /usr/lib/powerpc-linux-gnu/libepoxy.so.0 (0x0fe86000) + libgbm.so.1 => /usr/local/lib/libgbm.so.1 (0x0fe55000) + libX11.so.6 => /usr/lib/powerpc-linux-gnu/libX11.so.6 (0x0fcf2000) + libz.so.1 => /lib/powerpc-linux-gnu/libz.so.1 (0x0fcb1000) + libcurl-gnutls.so.4 => /usr/lib/powerpc-linux-gnu/libcurl-gnutls.so.4 (0x0fc10000) + libssh2.so.1 => /usr/lib/powerpc-linux-gnu/libssh2.so.1 (0x0fbbf000) + libbz2.so.1.0 => /lib/powerpc-linux-gnu/libbz2.so.1.0 (0x0fb7e000) + libpixman-1.so.0 => /usr/lib/powerpc-linux-gnu/libpixman-1.so.0 (0x0fadd000) + libutil.so.1 => /lib/powerpc-linux-gnu/libutil.so.1 (0x0faac000) + libnuma.so.1 => /usr/lib/powerpc-linux-gnu/libnuma.so.1 (0x0fa79000) + libncurses.so.5 => /lib/powerpc-linux-gnu/libncurses.so.5 (0x0fa28000) + libtinfo.so.5 => /lib/powerpc-linux-gnu/libtinfo.so.5 (0x0f9d7000) + libuuid.so.1 => /lib/powerpc-linux-gnu/libuuid.so.1 (0x0f9a6000) + libpng16.so.16 => /usr/lib/powerpc-linux-gnu/libpng16.so.16 (0x0f945000) + libjpeg.so.8 => /usr/lib/powerpc-linux-gnu/libjpeg.so.8 (0x0f8d4000) + libSDL2-2.0.so.0 => /usr/local/lib/libSDL2-2.0.so.0 (0x0f77d000) + libnettle.so.6 => /usr/lib/powerpc-linux-gnu/libnettle.so.6 (0x0f71c000) + libgnutls.so.30 => /usr/lib/powerpc-linux-gnu/libgnutls.so.30 (0x0f5ca000) + libgtk-x11-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgtk-x11-2.0.so.0 (0x0f0e6000) + libgdk-x11-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgdk-x11-2.0.so.0 (0x0f005000) + libcairo.so.2 => /usr/lib/powerpc-linux-gnu/libcairo.so.2 (0x0eec3000) + libgdk_pixbuf-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgdk_pixbuf-2.0.so.0 (0x0ee72000) + libgobject-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgobject-2.0.so.0 (0x0edf1000) + libglib-2.0.so.0 => /lib/powerpc-linux-gnu/libglib-2.0.so.0 (0x0eca0000) + libsnappy.so.1 => /usr/lib/powerpc-linux-gnu/libsnappy.so.1 (0x0ec6f000) + libusb-1.0.so.0 => /lib/powerpc-linux-gnu/libusb-1.0.so.0 (0x0ec2e000) + librt.so.1 => /lib/powerpc-linux-gnu/librt.so.1 (0x0ebfd000) + libm.so.6 => /lib/powerpc-linux-gnu/libm.so.6 (0x0eb0c000) + libgcc_s.so.1 => /lib/powerpc-linux-gnu/libgcc_s.so.1 (0x0eacb000) + libpthread.so.0 => /lib/powerpc-linux-gnu/libpthread.so.0 (0x0ea88000) + libc.so.6 => /lib/powerpc-linux-gnu/libc.so.6 (0x0e8d4000) + libdrm.so.2 => /usr/lib/powerpc-linux-gnu/libdrm.so.2 (0x0e8a3000) + libdl.so.2 => /lib/powerpc-linux-gnu/libdl.so.2 (0x0e872000) + libexpat.so.1 => /lib/powerpc-linux-gnu/libexpat.so.1 (0x0e821000) + libxcb.so.1 => /usr/lib/powerpc-linux-gnu/libxcb.so.1 (0x0e7e0000) + libidn.so.11 => /lib/powerpc-linux-gnu/libidn.so.11 (0x0e77f000) + librtmp.so.1 => /usr/lib/powerpc-linux-gnu/librtmp.so.1 (0x0e73e000) + libgssapi_krb5.so.2 => /usr/lib/powerpc-linux-gnu/libgssapi_krb5.so.2 (0x0e6cd000) + liblber-2.4.so.2 => /usr/lib/powerpc-linux-gnu/liblber-2.4.so.2 (0x0e69c000) + libldap_r-2.4.so.2 => /usr/lib/powerpc-linux-gnu/libldap_r-2.4.so.2 (0x0e61a000) + libgcrypt.so.20 => /lib/powerpc-linux-gnu/libgcrypt.so.20 (0x0e527000) + /lib/ld.so.1 (0x200a9000) + libsndio.so.6.1 => /usr/lib/powerpc-linux-gnu/libsndio.so.6.1 (0x0e4f4000) + libp11-kit.so.0 => /usr/lib/powerpc-linux-gnu/libp11-kit.so.0 (0x0e473000) + libtasn1.so.6 => /usr/lib/powerpc-linux-gnu/libtasn1.so.6 (0x0e432000) + libhogweed.so.4 => /usr/lib/powerpc-linux-gnu/libhogweed.so.4 (0x0e3d1000) + libgmp.so.10 => /usr/lib/powerpc-linux-gnu/libgmp.so.10 (0x0e330000) + libgmodule-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgmodule-2.0.so.0 (0x0e2ff000) + libpangocairo-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libpangocairo-1.0.so.0 (0x0e2ce000) + libXfixes.so.3 => /usr/lib/powerpc-linux-gnu/libXfixes.so.3 (0x0e29d000) + libatk-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libatk-1.0.so.0 (0x0e24c000) + libgio-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgio-2.0.so.0 (0x0e05a000) + libpangoft2-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libpangoft2-1.0.so.0 (0x0e019000) + libpango-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libpango-1.0.so.0 (0x0dfa8000) + libfontconfig.so.1 => /usr/lib/powerpc-linux-gnu/libfontconfig.so.1 (0x0df33000) + libXrender.so.1 => /usr/lib/powerpc-linux-gnu/libXrender.so.1 (0x0df02000) + libXinerama.so.1 => /usr/lib/powerpc-linux-gnu/libXinerama.so.1 (0x0dedf000) + libXi.so.6 => /usr/lib/powerpc-linux-gnu/libXi.so.6 (0x0de9e000) + libXrandr.so.2 => /usr/lib/powerpc-linux-gnu/libXrandr.so.2 (0x0de6d000) + libXcursor.so.1 => /usr/lib/powerpc-linux-gnu/libXcursor.so.1 (0x0de42000) + libXcomposite.so.1 => /usr/lib/powerpc-linux-gnu/libXcomposite.so.1 (0x0de1f000) + libXdamage.so.1 => /usr/lib/powerpc-linux-gnu/libXdamage.so.1 (0x0ddfc000) + libXext.so.6 => /usr/lib/powerpc-linux-gnu/libXext.so.6 (0x0ddc8000) + libfreetype.so.6 => /usr/lib/powerpc-linux-gnu/libfreetype.so.6 (0x0dcf7000) + libxcb-shm.so.0 => /usr/lib/powerpc-linux-gnu/libxcb-shm.so.0 (0x0dcc6000) + libxcb-render.so.0 => /usr/lib/powerpc-linux-gnu/libxcb-render.so.0 (0x0dc95000) + libffi.so.6 => /usr/lib/powerpc-linux-gnu/libffi.so.6 (0x0dc64000) + libpcre.so.3 => /lib/powerpc-linux-gnu/libpcre.so.3 (0x0dbd3000) + libstdc++.so.6 => /usr/lib/powerpc-linux-gnu/libstdc++.so.6 (0x0d9df000) + libudev.so.1 => /lib/powerpc-linux-gnu/libudev.so.1 (0x0d99d000) + libXau.so.6 => /usr/lib/powerpc-linux-gnu/libXau.so.6 (0x0d979000) + libXdmcp.so.6 => /usr/lib/powerpc-linux-gnu/libXdmcp.so.6 (0x0d948000) + libkrb5.so.3 => /usr/lib/powerpc-linux-gnu/libkrb5.so.3 (0x0d857000) + libk5crypto.so.3 => /usr/lib/powerpc-linux-gnu/libk5crypto.so.3 (0x0d806000) + libcom_err.so.2 => /lib/powerpc-linux-gnu/libcom_err.so.2 (0x0d7d5000) + libkrb5support.so.0 => /usr/lib/powerpc-linux-gnu/libkrb5support.so.0 (0x0d7a4000) + libresolv.so.2 => /lib/powerpc-linux-gnu/libresolv.so.2 (0x0d761000) + libsasl2.so.2 => /usr/lib/powerpc-linux-gnu/libsasl2.so.2 (0x0d720000) + libgssapi.so.3 => /usr/lib/powerpc-linux-gnu/libgssapi.so.3 (0x0d6be000) + libgpg-error.so.0 => /lib/powerpc-linux-gnu/libgpg-error.so.0 (0x0d67d000) + libasound.so.2 => /usr/lib/powerpc-linux-gnu/libasound.so.2 (0x0d54c000) + libbsd.so.0 => /lib/powerpc-linux-gnu/libbsd.so.0 (0x0d50b000) + libselinux.so.1 => /lib/powerpc-linux-gnu/libselinux.so.1 (0x0d4b9000) + libharfbuzz.so.0 => /usr/lib/powerpc-linux-gnu/libharfbuzz.so.0 (0x0d408000) + libthai.so.0 => /usr/lib/powerpc-linux-gnu/libthai.so.0 (0x0d3d7000) + libkeyutils.so.1 => /lib/powerpc-linux-gnu/libkeyutils.so.1 (0x0d3a6000) + libheimntlm.so.0 => /usr/lib/powerpc-linux-gnu/libheimntlm.so.0 (0x0d375000) + libkrb5.so.26 => /usr/lib/powerpc-linux-gnu/libkrb5.so.26 (0x0d2c3000) + libasn1.so.8 => /usr/lib/powerpc-linux-gnu/libasn1.so.8 (0x0d201000) + libhcrypto.so.4 => /usr/lib/powerpc-linux-gnu/libhcrypto.so.4 (0x0d19f000) + libroken.so.18 => /usr/lib/powerpc-linux-gnu/libroken.so.18 (0x0d15e000) + libgraphite2.so.3 => /usr/lib/powerpc-linux-gnu/libgraphite2.so.3 (0x0d10d000) + libdatrie.so.1 => /usr/lib/powerpc-linux-gnu/libdatrie.so.1 (0x0d0dc000) + libwind.so.0 => /usr/lib/powerpc-linux-gnu/libwind.so.0 (0x0d08b000) + libheimbase.so.1 => /usr/lib/powerpc-linux-gnu/libheimbase.so.1 (0x0d05a000) + libhx509.so.5 => /usr/lib/powerpc-linux-gnu/libhx509.so.5 (0x0cfe8000) + libsqlite3.so.0 => /usr/lib/powerpc-linux-gnu/libsqlite3.so.0 (0x0ceb6000) + libcrypt.so.1 => /lib/powerpc-linux-gnu/libcrypt.so.1 (0x0ce5e000) + + +Thanks + +In the title, you talk about PPC, but in the bug description, you talk about i386 ... quite confusing, please try to be consistent. But since you say that you run into this problem with all machine types, this sounds like a configuration problem to me. +Can you please specify how you run the configure script and what output you get there? Also, did you do a "make install" or are you trying to run QEMU from the folder where you compiled it? What output do you get if you run qemu-system-ppc64 with "-nographic" option? + +Hi T, +yes it is the emulated i386 machine qemu-system-i386 and it was working since something change in 2.6. +but issue is present in ppc machine too. dint try the kvm because on ppcemb there is not vga output. + +I had try the 2.5.1 and build and work and confirmed the issue is present only in 2.6 + + +ususally i build it with this : +./configure --with-sdlabi=2.0 --audio-drv-list=pa,sdl --target-list=i386-softmmu,ppc-softmmu,ppc64-softmmu + +i had been try with sdlabi=1.2 and without audio and without target list but have the same issue. +after work i will write my configure output probably can help? + + +Luigi + +Ah, you mean your *host* is running Ubuntu 16.10 PPC (i.e. not your guest)? Only looking at the title of this bug, I was assuming you were talking about the guest running Ubuntu 16.10 PPC (i.e. the host could also be a x86 machine)... +So yes, please provide also the output of "./configure ..." and specify the exact command line parameter that you use to run the emulator. + +Hi tony this are my configurations command i use for run the qemu-system-i386 +note it is working on 2.5.1 and 2.6 old release attached a shot you can see all is working in previous versions of 2.6 + +Aros: +qemu-system-i386 -m 2047 -drive file=/mnt/c7a1331a-6bfe-436e-b43d-fe2afead48e9/Aros.img,id=disk0,format=raw -net nic,model=rtl8139 -net user,smb=/home/amigaone/shared/ -vga vmware -balloon none -display sdl -cpu athlon -mem-prealloc -device virtio-scsi-pci,id=scsi -soundhw es1370 -cdrom /home/amigaone/emulators.iso + +Win98: +qemu-system-i386 -m 256 -drive file=/media/amigaone/mame/vhd/win98.img,id=disk0,format=raw -vga cirrus -display sdl -balloon none -mem-prealloc -device virtio-scsi-pci,id=scsi -rtc clock=host,base=localtime -serial none -parallel none + +winXP: + +qemu-system-i386 -m 2047 -drive file=/media/amigaone/mame/vhd/xp_black,id=disk0,format=raw -net nic,model=rtl8139 -net user,smb=/home/amigaone/shared/ -vga virtio -balloon virtio -display sdl -cpu athlon -mem-prealloc + + + +but qemu is working if only i open it thru qemu-system-i386 ... i have default setting with 128mb and bios running ... + +with lastest git not only "Guest has not initialized the display yet " or quitting like i described before... + +This is my complete configure from beginning + +./configure --with-sdlabi=2.0 --audio-drv-list=pa,sdl --target-list=i386-softmmu,ppc-softmmu,ppc64-softmmu,ppcemb-softmmu + +ERROR: DTC (libfdt) version >= 1.4.0 not present. Your options: + (1) Preferred: Install the DTC (libfdt) devel package + (2) Fetch the DTC submodule, using: + git submodule update --init dtc + +amigaone@Amigaone:~/src/qemu$ git submodule update --init dtc +Submodule 'dtc' (git://git.qemu-project.org/dtc.git) registered for path 'dtc' +Cloning into 'dtc'... +remote: Counting objects: 2778, done. +remote: Compressing objects: 100% (1692/1692), done. +remote: Total 2778 (delta 2058), reused 1415 (delta 1056) +Receiving objects: 100% (2778/2778), 654.26 KiB | 376.00 KiB/s, done. +Resolving deltas: 100% (2058/2058), done. +Checking connectivity... done. +Submodule path 'dtc': checked out '65cc4d2748a2c2e6f27f1cf39e07a5dbabd80ebf' +amigaone@Amigaone:~/src/qemu$ ./configure --with-sdlabi=2.0 --audio-drv-list=pa,sdl --target-list=i386-softmmu,ppc-softmmu,ppc64-softmmu,ppcemb-softmmu +Install prefix /usr/local +BIOS directory /usr/local/share/qemu +binary directory /usr/local/bin +library directory /usr/local/lib +module directory /usr/local/lib/qemu +libexec directory /usr/local/libexec +include directory /usr/local/include +config directory /usr/local/etc +local state directory /usr/local/var +Manual directory /usr/local/share/man +ELF interp prefix /usr/gnemul/qemu-%M +Source path /home/amigaone/src/qemu +C compiler cc +Host C compiler cc +C++ compiler c++ +Objective-C compiler clang +ARFLAGS rv +CFLAGS -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -pthread -I/usr/include/glib-2.0 -I/usr/lib/powerpc-linux-gnu/glib-2.0/include -g +QEMU_CFLAGS -I/usr/include/pixman-1 -I$(SRC_PATH)/dtc/libfdt -Werror -DHAS_LIBSSH2_SFTP_FSYNC -m32 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -Wendif-labels -Wmissing-include-dirs -Wempty-body -Wnested-externs -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wold-style-declaration -Wold-style-definition -Wtype-limits -fstack-protector-strong -I/usr/include/p11-kit-1 -I/usr/local/include -I/usr/include/libpng16 -I/usr/include/libusb-1.0 +LDFLAGS -Wl,--warn-common -m32 -g +make make +install install +python python -B +smbd /usr/sbin/smbd +module support no +host CPU ppc +host big endian yes +target list i386-softmmu ppc-softmmu ppc64-softmmu ppcemb-softmmu +tcg debug enabled no +gprof enabled no +sparse enabled no +strip binaries yes +profiler no +static build no +pixman system +SDL support yes (2.0.4) +GTK support yes (2.24.30) +GTK GL support no +VTE support no +TLS priority NORMAL +GNUTLS support yes +GNUTLS rnd yes +libgcrypt no +libgcrypt kdf no +nettle yes (3.2) +nettle kdf yes +libtasn1 yes +curses support yes +virgl support yes +curl support yes +mingw32 support no +Audio drivers pa sdl +Block whitelist (rw) +Block whitelist (ro) +VirtFS support no +VNC support yes +VNC SASL support no +VNC JPEG support yes +VNC PNG support yes +xen support no +brlapi support no +bluez support no +Documentation yes +PIE no +vde support no +netmap support no +Linux AIO support no +ATTR/XATTR support yes +Install blobs yes +KVM support yes +RDMA support no +TCG interpreter no +fdt support yes +preadv support yes +fdatasync yes +madvise yes +posix_madvise yes +uuid support yes +libcap-ng support no +vhost-net support yes +vhost-scsi support yes +Trace backends log +spice support no +rbd support no +xfsctl support no +smartcard support no +libusb yes +usb net redir no +OpenGL support yes +OpenGL dmabufs yes +libiscsi support no +libnfs support no +build guest agent yes +QGA VSS support no +QGA w32 disk info no +QGA MSI support no +seccomp support no +coroutine backend ucontext +coroutine pool yes +GlusterFS support no +Archipelago support no +gcov gcov +gcov enabled no +TPM support yes +libssh2 support yes +TPM passthrough no +QOM debugging yes +vhdx yes +lzo support no +snappy support yes +bzip2 support yes +NUMA host support yes +tcmalloc support no +jemalloc support no +avx2 optimization no + + + + +one shot +of qemu-system-i386 2.6 old version, oldest was working + + + +Hi T, +i just make a test on My Quad G5 and Mate 15.10 and here i have the same issue ... no video on last 2.6. I think this issue is present on all ppc world + +Can you use "git bisect" to determine the exact commit that causes this problem to appear? + +Hi T, +i can gave a try ... i never used "git bisect" +i have to use it with the executable? with "git bisect log" or somthing else? + +You initially have to specify a commit that is known to fail, and one that is known to work, so in this case it's likely: + git bisect start master v2.6.0 +It then checks out a revision inbetween. Compile it with "make" and run the built QEMU to check whether it is working or not. +If it is not working, use this command to continue: + git bisect bad +If it was working, use this command instead: + git bisect good +Then continue to compile and test the next revision. git bisect should guide you this way to the commit that introduced the bug. + +Hi T, +thanks for the infos i will report ASAP + +Hi T, found! + +this was last bad a select + +git bisect bad +Bisecting: 101 revisions left to test after this (roughly 7 steps) +[f68419eee9a966f5a915314c43cda6778f976a77] Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging + +this is the good + + +git bisect good +Bisecting: 58 revisions left to test after this (roughly 6 steps) +[14fccfa91ecac7af36ac03dc1c2bb9a1d7fbca26] Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160513' into staging + + +Ciao +Luigi + + +but what i see in this working there isnt your sdl2 patch. + + +If git bisect says something about "XX revisions left to test after this" then you're not done yet, you have to continue the git bisecting process until it is finished. +And if you need the sdl2 patch additionally, you have to apply it manually after each step if necessary. I'm sorry, it's quite cumbersome, but likely still the best solution to determine where your problem comes from. + +Hi T, +Ok. I m sorry i was thinking only this was needed i will made the other git bisect and report + +Luigi + +Hi t, + +this is what you need? +70f87e0f0aa04f764dabaeb3ed71ff195748076a is the first bad commit + + +Hi t, +just to notice the 2.7 is effected too :-( + +./qemu-system-i386 +qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000 +This usually means one of the following happened: + +(1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine) +(2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end +(3) Your guest kernel has a bug and crashed by jumping off into nowhere + +This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine. +If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point. + +Execution cannot continue; stopping here. + +amigaone@Amigaone:~/src/pippo/qemu/i386-softmmu$ ./qemu-system-i386 -m 1024 +qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000 +This usually means one of the following happened: + +(1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine) +(2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end +(3) Your guest kernel has a bug and crashed by jumping off into nowhere + +This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine. +If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point. + +Execution cannot continue; stopping here. + +amigaone@Amigaone:~/src/pippo/qemu/i386-softmmu$ ./qemu-system-i386 --version +QEMU emulator version 2.6.90 (v2.7.0-rc0-10-gf49ee63-dirty), Copyright (c) 2003-2008 Fabrice Bellard + + +Hi T, +im checking and testing the lastest qemu and i understand +the issue is present only with all softmmu system . +if i open eg qemu-system-ppc64 i have the issue +if i open qemu-system-ppc64 with kvm enabled the issue isnt present and all run like have to be. + +It means all the emulated machine not work , virtualized only run. +in my case on g5 quad i cant emulate an X86 or a old world mac +but i can virtualize my g5 quad with a debian. +same is on p5020 machine. + +Hope it help + + Hi Luigi, + +70f87e0f0aa04f764dabaeb3ed71ff195748076a is a merge commit ... that should not have shown up as a result from bisecting. +Anyway, since it is pointing to a ui merge ... could you please: + +1) check whether it is still working fine with the first patch of that ui series, i.e.: + git checkout 4fd811a6bd0b8f24f4761fc281454494c336d310 + and then compile and test that version + +2) check whether it is really hanging / not working withe the last patch of that ui series, i.e.: + git checkout 6978dc4adcdf27722aa6f9e13f88a903b30a3f8d + and then compile and test that version + +Thanks! + +Hi T, +bad news i had to format my partition with 16.10 and dont have the 2.6.0 src any more if there is a way to git clone it please letme know. +note : 2.6.1 have the issue , 2.7.x is effected too. + +Luigi + +Alll revisions are available in the git repository, so please simply do: + + git clone git://git.qemu-project.org/qemu.git + cd qemu + git checkout 4fd811a6bd0b8f24f4761fc281454494c336d310 + ./configure ... + make -j4 + +And then check whether it is working or not. +Once you're done, switch to the other revision and compile again: + + git checkout 6978dc4adcdf27722aa6f9e13f88a903b30a3f8d + make -j4 + +and check whether that one is working or not. + +Hi T, +good news the 2.6.2 is working without the issue reported, but it not include your previous patches . +Ciao +Luigi + |