diff options
Diffstat (limited to 'results/classifier/zero-shot/105/other/2194')
| -rw-r--r-- | results/classifier/zero-shot/105/other/2194 | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/results/classifier/zero-shot/105/other/2194 b/results/classifier/zero-shot/105/other/2194 new file mode 100644 index 000000000..fe947055f --- /dev/null +++ b/results/classifier/zero-shot/105/other/2194 @@ -0,0 +1,107 @@ +other: 0.791 +device: 0.786 +instruction: 0.781 +graphic: 0.781 +assembly: 0.764 +KVM: 0.746 +semantic: 0.735 +network: 0.691 +boot: 0.690 +vnc: 0.613 +mistranslation: 0.593 +socket: 0.478 + +qemu-system-mips64el loongson3-virt fails to complete boot +Description of problem: +I try to install Debian 12 using the netboot kernel (6.1.0) and initrd: +``` +NETBOOT=http://ftp.debian.org/debian/dists/stable/main/installer-mips64el/current/images/loongson-3/netboot +wget $NETBOOT/initrd.gz +wget $NETBOOT/vmlinuz-6.1.0-18-loongson-3 -O vmlinuz +qemu-img create -f qcow2 disk.qcow2 30G +``` + +Then I boot the installer: +``` +qemu-system-mips64el \ + -machine loongson3-virt -cpu Loongson-3A1000 -smp 4 -m 6G -nographic \ + -kernel vmlinuz -initrd initrd.gz \ + -drive file=disk.qcow2,if=none,id=drive-virtio-disk0 \ + -device virtio-blk-pci,drive=drive-virtio-disk0 \ + -append "root=/dev/sda1" +``` + +The boot stops after this: +``` +[ 0.000000] Linux version 6.1.0-18-loongson-3 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 6.1.76-1 (2024-02-01) +[ 0.000000] Firmware: Coherent DMA: on +[ 0.000000] CpuClock = 800000000 +[ 0.000000] The bridge chip is VIRTUAL +[ 0.000000] CP0_Config3: CP0 16.3 (0x80) +[ 0.000000] CP0_PageGrain: CP0 5.1 (0x20000000) +[ 0.000000] NUMA: Discovered 4 cpus on 1 nodes +[ 0.000000] Node 0, mem_type:1 [0x0000000000000000], 0x000000000f000000 bytes usable +[ 0.000000] Node 0, mem_type:2 [0x0000000090000000], 0x0000000170000000 bytes usable +[ 0.000000] Node0's addrspace_offset is 0x0 +[ 0.000000] Node0: start_pfn=0x0, end_pfn=0x80000 +[ 0.000000] NUMA: set cpumask cpu 0 on node 0 +[ 0.000000] NUMA: set cpumask cpu 1 on node 0 +[ 0.000000] NUMA: set cpumask cpu 2 on node 0 +[ 0.000000] NUMA: set cpumask cpu 3 on node 0 +[ 0.000000] printk: bootconsole [early0] enabled +[ 0.000000] CPU0 revision is: 00006305 (ICT Loongson-3) +[ 0.000000] FPU revision is: 00770501 +[ 0.000000] MIPS: machine is loongson,loongson64v-4core-virtio +[ 0.000000] Initial ramdisk at: 0x9800000004000000 (28553950 bytes) +[ 0.000000] software IO TLB: area num 1. +[ 0.000000] software IO TLB: mapped [mem 0x0000000005b3c000-0x0000000009b3c000] (64MB) +[ 0.000000] DMI not present or invalid. +[ 0.000000] Detected 4 available CPU(s) +[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. +[ 0.000000] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes +[ 0.000000] Unified victim cache 0kB direct mapped, linesize 0 bytes. +[ 0.000000] Unified secondary cache 4096kB 4-way, linesize 32 bytes. +[ 0.000000] Zone ranges: +[ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff] +[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] +[ 0.000000] Movable zone start for each node +[ 0.000000] Early memory node ranges +[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000effffff] +[ 0.000000] node 0: [mem 0x0000000090000000-0x00000001ffffffff] +[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] +[ 0.000000] On node 0, zone DMA32: 1024 pages in unavailable ranges +[ 0.000000] percpu: Embedded 13 pages/cpu s170800 r8192 d34000 u212992 +[ 0.000000] Fallback order for Node 0: 0 +[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 390660 +[ 0.000000] Policy zone: Normal +[ 0.000000] Kernel command line: rd_start=0xffffffff84000000 rd_size=28553950 root=/dev/sda1 nokaslr +[ 0.000000] Unknown kernel command line parameters "nokaslr", will be passed to user space. +[ 0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear) +[ 0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear) +[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off +[ 0.000000] Memory: 2183328K/6275072K available (11247K kernel code, 1773K rwdata, 3152K rodata, 2688K init, 547K bss, 184208K reserved, 0K cma-reserved) +[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 +[ 0.000000] ftrace: allocating 32150 entries in 32 pages +[ 0.000000] ftrace: allocated 32 pages with 1 groups +[ 0.000000] trace event string verifier disabled +[ 0.000000] rcu: Preemptible hierarchical RCU implementation. +[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. +[ 0.000000] Trampoline variant of Tasks RCU enabled. +[ 0.000000] Rude variant of Tasks RCU enabled. +[ 0.000000] Tracing variant of Tasks RCU enabled. +[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. +[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 +[ 0.000000] NR_IRQS: 320 +[ 0.000000] ISA Bridge: /bus@10000000/isa@18000000 +[ 0.000000] IO 0x0000000018000000..0x0000000018003fff -> 0x0000000000000000 +[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. +[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4778151116 ns +[ 0.000072] sched_clock: 32 bits at 400MHz, resolution 2ns, wraps every 5368709118ns +[ 0.002813] Console: colour dummy device 80x25 +[ 0.003195] printk: console [tty0] enabled +[ 0.005876] printk: bootconsole [early0] disabled +``` + +Then, nothing happens. The qemu process uses 100% CPU on the host. + +I tried with `-smp 1` and got the same result. |