diff options
Diffstat (limited to 'results/classifier/zero-shot/108/none/636')
| -rw-r--r-- | results/classifier/zero-shot/108/none/636 | 371 |
1 files changed, 371 insertions, 0 deletions
diff --git a/results/classifier/zero-shot/108/none/636 b/results/classifier/zero-shot/108/none/636 new file mode 100644 index 000000000..c41a275e5 --- /dev/null +++ b/results/classifier/zero-shot/108/none/636 @@ -0,0 +1,371 @@ +graphic: 0.503 +performance: 0.462 +debug: 0.452 +files: 0.443 +other: 0.442 +permissions: 0.434 +KVM: 0.430 +boot: 0.371 +socket: 0.370 +vnc: 0.366 +network: 0.356 +semantic: 0.352 +PID: 0.334 +device: 0.330 + +tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_initrd can not perform graceful shutdown +Description of problem: +Roughly once every 20 times, the [`halt`](https://gitlab.com/qemu-project/qemu/-/blob/73257aa02376829f724357094e252fc3e5dd1363/tests/acceptance/boot_linux_console.py#L522) command will not produce the desired effect, and [wait()ing](https://gitlab.com/qemu-project/qemu/-/blob/73257aa02376829f724357094e252fc3e5dd1363/tests/acceptance/boot_linux_console.py#L524) on the QEMU process to gracefully shutdown will fail. + +I was not able to see any other failure in what the test covers, except the `halt` command and the `wait()`ing. That is, the booting of the kernel and initrd, and the execution of commands to inspect the system all run without problems. +Steps to reproduce: +1. make check-venv +2. ./tests/venv/bin/avocado run tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_initrd +Additional information: +``` +13:48:01 DEBUG| PARAMS (key=arch, path=*, default=arm) => 'arm' +13:48:01 DEBUG| PARAMS (key=cpu, path=*, default=None) => None +13:48:01 DEBUG| PARAMS (key=machine, path=*, default=raspi2b) => 'raspi2b' +13:48:01 DEBUG| PARAMS (key=qemu_bin, path=*, default=./qemu-system-arm) => './qemu-system-arm' +13:48:01 DEBUG| Test workdir initialized at: /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd +13:48:08 DEBUG| QEMUMachine "default" created +13:48:08 DEBUG| QEMUMachine "default" temp_dir: /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/qemu-machine-5pavn9gy +13:48:08 DEBUG| QEMUMachine "default" log_dir: /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd +13:48:08 DEBUG| VM launch command: './qemu-system-arm -display none -vga none -chardev socket,id=mon,path=/var/tmp/avo_qemu_sock_hd3upfg6/qemu-2435532-monitor.sock -mon chardev=mon,mode=control -machine raspi2b -chardev socket,id=console,path=/var/tmp/avo_qemu_sock_hd3upfg6/qemu-2435532-console.sock,server=on,wait=off -serial chardev:console -kernel /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/boot/kernel7.img -dtb /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/boot/bcm2709-rpi-2-b.dtb -initrd /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/rootfs.cpio -append printk.time=0 earlycon=pl011,0x3f201000 console=ttyAMA0 panic=-1 noreboot dwc_otg.fiq_fsm_enable=0 -no-reboot' +13:48:08 DEBUG| >>> {'execute': 'qmp_capabilities'} +13:48:08 DEBUG| <<< {'return': {}} +13:48:08 DEBUG| [ 0.000000] Booting Linux on physical CPU 0xf00 +13:48:08 DEBUG| [ 0.000000] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019 +13:48:08 DEBUG| [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d +13:48:08 DEBUG| [ 0.000000] CPU: div instructions available: patching division code +13:48:08 DEBUG| [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache +13:48:08 DEBUG| [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B +13:48:08 DEBUG| [ 0.000000] earlycon: pl11 at MMIO 0x3f201000 (options '') +13:48:08 DEBUG| [ 0.000000] bootconsole [pl11] enabled +13:48:08 DEBUG| [ 0.000000] Memory policy: Data cache writealloc +13:48:08 DEBUG| [ 0.000000] cma: Reserved 8 MiB at 0x3b800000 +13:48:08 DEBUG| [ 0.000000] percpu: Embedded 17 pages/cpu @baf2e000 s38720 r8192 d22720 u69632 +13:48:08 DEBUG| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 243600 +13:48:08 DEBUG| [ 0.000000] Kernel command line: printk.time=0 earlycon=pl011,0x3f201000 console=ttyAMA0 panic=-1 noreboot dwc_otg.fiq_fsm_enable=0 +13:48:08 DEBUG| PID hash table entries: 4096 (order: 2, 16384 bytes) +13:48:08 DEBUG| Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) +13:48:08 DEBUG| Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) +13:48:08 DEBUG| Memory: 949120K/983040K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 25728K reserved, 8192K cma-reserved) +13:48:08 DEBUG| Virtual kernel memory layout: +13:48:08 DEBUG| vector : 0xffff0000 - 0xffff1000 ( 4 kB) +13:48:08 DEBUG| fixmap : 0xffc00000 - 0xfff00000 (3072 kB) +13:48:08 DEBUG| vmalloc : 0xbc800000 - 0xff800000 (1072 MB) +13:48:08 DEBUG| lowmem : 0x80000000 - 0xbc000000 ( 960 MB) +13:48:08 DEBUG| modules : 0x7f000000 - 0x80000000 ( 16 MB) +13:48:08 DEBUG| .text : 0x80008000 - 0x80800000 (8160 kB) +13:48:08 DEBUG| .init : 0x80b00000 - 0x80c00000 (1024 kB) +13:48:08 DEBUG| .data : 0x80c00000 - 0x80c906d4 ( 578 kB) +13:48:08 DEBUG| .bss : 0x80c97ef8 - 0x80d468f0 ( 699 kB) +13:48:08 DEBUG| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 +13:48:08 DEBUG| ftrace: allocating 25298 entries in 75 pages +13:48:09 DEBUG| Hierarchical RCU implementation. +13:48:09 DEBUG| NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 +13:48:09 DEBUG| arch_timer: cp15 timer(s) running at 62.50MHz (virt). +13:48:09 DEBUG| clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns +13:48:09 DEBUG| sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns +13:48:09 DEBUG| Switching to timer-based delay loop, resolution 16ns +13:48:09 DEBUG| Console: colour dummy device 80x30 +13:48:09 DEBUG| Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) +13:48:09 DEBUG| pid_max: default: 32768 minimum: 301 +13:48:09 DEBUG| Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) +13:48:09 DEBUG| Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) +13:48:09 DEBUG| Disabling memory control group subsystem +13:48:09 DEBUG| CPU: Testing write buffer coherency: ok +13:48:09 DEBUG| CPU0: update cpu_capacity 1024 +13:48:09 DEBUG| CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 +13:48:09 DEBUG| Setting up static identity map for 0x100000 - 0x10003c +13:48:09 DEBUG| Hierarchical SRCU implementation. +13:48:09 DEBUG| smp: Bringing up secondary CPUs ... +13:48:09 DEBUG| CPU1: update cpu_capacity 1024 +13:48:09 DEBUG| CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 +13:48:09 DEBUG| CPU2: update cpu_capacity 1024 +13:48:09 DEBUG| CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 +13:48:09 DEBUG| CPU3: update cpu_capacity 1024 +13:48:09 DEBUG| CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 +13:48:09 DEBUG| smp: Brought up 1 node, 4 CPUs +13:48:09 DEBUG| SMP: Total of 4 processors activated (500.00 BogoMIPS). +13:48:09 DEBUG| CPU: All CPU(s) started in SVC mode. +13:48:09 DEBUG| devtmpfs: initialized +13:48:09 DEBUG| random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0 +13:48:09 DEBUG| VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 +13:48:09 DEBUG| clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns +13:48:09 DEBUG| futex hash table entries: 1024 (order: 4, 65536 bytes) +13:48:09 DEBUG| pinctrl core: initialized pinctrl subsystem +13:48:09 DEBUG| NET: Registered protocol family 16 +13:48:09 DEBUG| DMA: preallocated 1024 KiB pool for atomic coherent allocations +13:48:09 DEBUG| hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. +13:48:09 DEBUG| hw-breakpoint: maximum watchpoint size is 8 bytes. +13:48:09 DEBUG| Serial: AMBA PL011 UART driver +13:48:09 DEBUG| bcm2835-mbox 3f00b880.mailbox: mailbox enabled +13:48:09 DEBUG| bcm2835-dma 3f007000.dma: DMA legacy API manager at bc813000, dmachans=0x1 +13:48:09 DEBUG| SCSI subsystem initialized +13:48:09 DEBUG| usbcore: registered new interface driver usbfs +13:48:09 DEBUG| usbcore: registered new interface driver hub +13:48:09 DEBUG| usbcore: registered new device driver usb +13:48:09 DEBUG| raspberrypi-firmware soc:firmware: Attached to firmware from 1970-01-05 00:12 +13:48:09 DEBUG| clocksource: Switched to clocksource arch_sys_counter +13:48:09 DEBUG| VFS: Disk quotas dquot_6.6.0 +13:48:09 DEBUG| VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) +13:48:09 DEBUG| FS-Cache: Loaded +13:48:09 DEBUG| CacheFiles: Loaded +13:48:09 DEBUG| NET: Registered protocol family 2 +13:48:09 DEBUG| TCP established hash table entries: 8192 (order: 3, 32768 bytes) +13:48:09 DEBUG| TCP bind hash table entries: 8192 (order: 4, 65536 bytes) +13:48:09 DEBUG| TCP: Hash tables configured (established 8192 bind 8192) +13:48:09 DEBUG| UDP hash table entries: 512 (order: 2, 16384 bytes) +13:48:09 DEBUG| UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) +13:48:09 DEBUG| NET: Registered protocol family 1 +13:48:09 DEBUG| RPC: Registered named UNIX socket transport module. +13:48:09 DEBUG| RPC: Registered udp transport module. +13:48:09 DEBUG| RPC: Registered tcp transport module. +13:48:09 DEBUG| RPC: Registered tcp NFSv4.1 backchannel transport module. +13:48:09 DEBUG| Trying to unpack rootfs image as initramfs... +13:48:09 DEBUG| Freeing initrd memory: 3256K +13:48:09 DEBUG| hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available +13:48:09 DEBUG| workingset: timestamp_bits=14 max_order=18 bucket_order=4 +13:48:09 DEBUG| FS-Cache: Netfs 'nfs' registered for caching +13:48:09 DEBUG| NFS: Registering the id_resolver key type +13:48:09 DEBUG| Key type id_resolver registered +13:48:09 DEBUG| Key type id_legacy registered +13:48:09 DEBUG| nfs4filelayout_init: NFSv4 File Layout Driver Registering... +13:48:09 DEBUG| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) +13:48:09 DEBUG| io scheduler noop registered +13:48:09 DEBUG| io scheduler deadline registered +13:48:09 DEBUG| io scheduler cfq registered (default) +13:48:09 DEBUG| io scheduler mq-deadline registered +13:48:09 DEBUG| io scheduler kyber registered +13:48:09 DEBUG| BCM2708FB: allocated DMA memory fb900000 +13:48:09 DEBUG| BCM2708FB: allocated DMA channel 0 @ bc813000 +13:48:09 DEBUG| Console: switching to colour frame buffer device 100x30 +13:48:09 DEBUG| bcm2835-rng 3f104000.rng: hwrng registered +13:48:09 DEBUG| vc-mem: phys_addr:0x00000000 mem_base=0x00000000 mem_size:0x00000000(0 MiB) +13:48:09 DEBUG| vc-sm: Videocore shared memory driver +13:48:09 DEBUG| gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 +13:48:09 DEBUG| brd: module loaded +13:48:09 DEBUG| loop: module loaded +13:48:09 DEBUG| Loading iSCSI transport class v2.0-870. +13:48:09 DEBUG| libphy: Fixed MDIO Bus: probed +13:48:09 DEBUG| usbcore: registered new interface driver lan78xx +13:48:09 DEBUG| usbcore: registered new interface driver smsc95xx +13:48:09 DEBUG| dwc_otg: version 3.00a 10-AUG-2012 (platform bus) +13:48:09 DEBUG| dwc_otg 3f980000.usb: base=0xf0980000 +13:48:10 DEBUG| Core Release: 2.94a +13:48:10 DEBUG| Setting default values for core params +13:48:10 DEBUG| Finished setting default values for core params +13:48:10 DEBUG| Using Buffer DMA mode +13:48:10 DEBUG| Periodic Transfer Interrupt Enhancement - disabled +13:48:10 DEBUG| Multiprocessor Interrupt Enhancement - disabled +13:48:10 DEBUG| OTG VER PARAM: 0, OTG VER FLAG: 0 +13:48:10 DEBUG| Shared Tx FIFO mode +13:48:10 DEBUG| WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbb914000 dma = 0xfb914000 len=9024 +13:48:10 DEBUG| WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805edb88 +13:48:10 DEBUG| WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36 +13:48:10 DEBUG| WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000 +13:48:10 DEBUG| dwc_otg 3f980000.usb: DWC OTG Controller +13:48:10 DEBUG| dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 +13:48:10 DEBUG| dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 +13:48:10 DEBUG| Init: Port Power? op_state=1 +13:48:10 DEBUG| Init: Power Port (1) +13:48:10 DEBUG| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 +13:48:10 DEBUG| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 +13:48:10 DEBUG| usb usb1: Product: DWC OTG Controller +13:48:10 DEBUG| usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd +13:48:10 DEBUG| usb usb1: SerialNumber: 3f980000.usb +13:48:10 DEBUG| hub 1-0:1.0: USB hub found +13:48:10 DEBUG| hub 1-0:1.0: 1 port detected +13:48:10 DEBUG| usbcore: registered new interface driver usb-storage +13:48:10 DEBUG| mousedev: PS/2 mouse device common for all mice +13:48:10 DEBUG| IR NEC protocol handler initialized +13:48:10 DEBUG| IR RC5(x/sz) protocol handler initialized +13:48:10 DEBUG| IR RC6 protocol handler initialized +13:48:10 DEBUG| IR JVC protocol handler initialized +13:48:10 DEBUG| IR Sony protocol handler initialized +13:48:10 DEBUG| IR SANYO protocol handler initialized +13:48:10 DEBUG| IR Sharp protocol handler initialized +13:48:10 DEBUG| IR MCE Keyboard/mouse protocol handler initialized +13:48:10 DEBUG| IR XMP protocol handler initialized +13:48:10 DEBUG| bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer +13:48:10 DEBUG| bcm2835-cpufreq: min=700000 max=700000 +13:48:10 DEBUG| sdhci: Secure Digital Host Controller Interface driver +13:48:10 DEBUG| sdhci: Copyright(c) Pierre Ossman +13:48:10 DEBUG| sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe +13:48:10 DEBUG| sdhci-pltfm: SDHCI platform and OF driver helper +13:48:10 DEBUG| ledtrig-cpu: registered to indicate activity on CPUs +13:48:10 DEBUG| hidraw: raw HID events driver (C) Jiri Kosina +13:48:10 DEBUG| usbcore: registered new interface driver usbhid +13:48:10 DEBUG| usbhid: USB HID core driver +13:48:10 DEBUG| vchiq: vchiq_init_state: slot_zero = bb980000, is_master = 0 +13:48:10 DEBUG| bcm2835_vchiq 3f00b840.vchiq: failed to set channelbase +13:48:10 DEBUG| vchiq: could not load vchiq +13:48:10 DEBUG| Initializing XFRM netlink socket +13:48:10 DEBUG| NET: Registered protocol family 17 +13:48:10 DEBUG| Key type dns_resolver registered +13:48:10 DEBUG| Registering SWP/SWPB emulation handler +13:48:10 DEBUG| registered taskstats version 1 +13:48:10 DEBUG| uart-pl011 3f201000.serial: cts_event_workaround enabled +13:48:10 DEBUG| 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 +13:48:10 DEBUG| console [ttyAMA0] enabled +13:48:10 DEBUG| console [ttyAMA0] enabled +13:48:10 DEBUG| bootconsole [pl11] disabled +13:48:10 DEBUG| bootconsole [pl11] disabled +13:48:10 DEBUG| bcm2835_thermal 3f212000.thermal: Not able to read trip_temp: -33 +13:48:10 DEBUG| bcm2835-clk 3f101000.cprman: tsens: couldn't lock PLL +13:48:10 DEBUG| bcm2835_thermal: probe of 3f212000.thermal failed with error -33 +13:48:10 DEBUG| sdhost: log_buf @ bb913000 (fb913000) +13:48:10 DEBUG| mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) +13:48:10 DEBUG| of_cfs_init +13:48:10 DEBUG| of_cfs_init: OK +13:48:10 DEBUG| uart-pl011 3f201000.serial: no DMA platform data +13:48:10 DEBUG| Freeing unused kernel memory: 1024K +13:48:11 DEBUG| mount: mounting devtmpfs on /dev failed: Device or resource busy +13:48:11 DEBUG| Starting logging: OK +13:48:11 DEBUG| Initializing random number generator... random: dd: uninitialized urandom read (512 bytes read) +13:48:11 DEBUG| done. +13:48:12 DEBUG| Starting network: OK +13:48:12 DEBUG| Found console ttyAMA0 +13:48:12 DEBUG| Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019 +13:48:12 DEBUG| Boot successful. +13:48:12 DEBUG| cat /proc/cpuinfo +13:48:12 DEBUG| / # cat /proc/cpuinfo +13:48:12 DEBUG| processor : 0 +13:48:12 DEBUG| model name : ARMv7 Processor rev 5 (v7l) +13:48:12 DEBUG| BogoMIPS : 125.00 +13:48:12 DEBUG| Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm +13:48:12 DEBUG| CPU implementer : 0x41 +13:48:12 DEBUG| CPU architecture: 7 +13:48:12 DEBUG| CPU variant : 0x0 +13:48:12 DEBUG| CPU part : 0xc07 +13:48:12 DEBUG| CPU revision : 5 +13:48:12 DEBUG| processor : 1 +13:48:12 DEBUG| model name : ARMv7 Processor rev 5 (v7l) +13:48:12 DEBUG| BogoMIPS : 125.00 +13:48:12 DEBUG| Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm +13:48:12 DEBUG| CPU implementer : 0x41 +13:48:12 DEBUG| CPU architecture: 7 +13:48:12 DEBUG| CPU variant : 0x0 +13:48:12 DEBUG| CPU part : 0xc07 +13:48:12 DEBUG| CPU revision : 5 +13:48:12 DEBUG| processor : 2 +13:48:12 DEBUG| model name : ARMv7 Processor rev 5 (v7l) +13:48:12 DEBUG| BogoMIPS : 125.00 +13:48:12 DEBUG| Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm +13:48:12 DEBUG| CPU implementer : 0x41 +13:48:12 DEBUG| CPU architecture: 7 +13:48:12 DEBUG| CPU variant : 0x0 +13:48:12 DEBUG| CPU part : 0xc07 +13:48:12 DEBUG| CPU revision : 5 +13:48:12 DEBUG| processor : 3 +13:48:12 DEBUG| model name : ARMv7 Processor rev 5 (v7l) +13:48:12 DEBUG| BogoMIPS : 125.00 +13:48:12 DEBUG| Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm +13:48:12 DEBUG| CPU implementer : 0x41 +13:48:12 DEBUG| CPU architecture: 7 +13:48:12 DEBUG| CPU variant : 0x0 +13:48:12 DEBUG| CPU part : 0xc07 +13:48:12 DEBUG| CPU revision : 5 +13:48:12 DEBUG| Hardware : BCM2835 +13:48:12 DEBUG| Revision : 0000 +13:48:12 DEBUG| Serial : 0000000000000000 +13:48:12 DEBUG| cat /proc/iomem +13:48:12 DEBUG| / # cat /proc/iomem +13:48:12 DEBUG| 00000000-3bffffff : System RAM +13:48:12 DEBUG| 00008000-00afffff : Kernel code +13:48:12 DEBUG| 00c00000-00d468ef : Kernel data +13:48:12 DEBUG| 3f006000-3f006fff : dwc_otg +13:48:12 DEBUG| 3f007000-3f007eff : /soc/dma@7e007000 +13:48:12 DEBUG| 3f00b880-3f00b8bf : /soc/mailbox@7e00b880 +13:48:12 DEBUG| 3f100000-3f100027 : /soc/watchdog@7e100000 +13:48:12 DEBUG| 3f101000-3f102fff : /soc/cprman@7e101000 +13:48:12 DEBUG| 3f200000-3f2000b3 : /soc/gpio@7e200000 +13:53:12 WARNI| qemu received signal 9; command: "./qemu-system-arm -display none -vga none -chardev socket,id=mon,path=/var/tmp/avo_qemu_sock_hd3upfg6/qemu-2435532-monitor.sock -mon chardev=mon,mode=control -machine raspi2b -chardev socket,id=console,path=/var/tmp/avo_qemu_sock_hd3upfg6/qemu-2435532-console.sock,server=on,wait=off -serial chardev:console -kernel /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/boot/kernel7.img -dtb /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/boot/bcm2709-rpi-2-b.dtb -initrd /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/rootfs.cpio -append printk.time=0 earlycon=pl011,0x3f201000 console=ttyAMA0 panic=-1 noreboot dwc_otg.fiq_fsm_enable=0 -no-reboot" +13:53:12 ERROR| +13:53:12 ERROR| Reproduced traceback from: /var/lib/users/cleber/build/qemu/tests/venv/lib64/python3.9/site-packages/avocado/core/test.py:794 +13:53:12 ERROR| Traceback (most recent call last): +13:53:12 ERROR| File "/home/cleber/src/qemu/python/qemu/machine/machine.py", line 514, in _do_shutdown +13:53:12 ERROR| self._soft_shutdown(timeout, has_quit) +13:53:12 ERROR| File "/home/cleber/src/qemu/python/qemu/machine/machine.py", line 497, in _soft_shutdown +13:53:12 ERROR| self._subp.wait(timeout=timeout) +13:53:12 ERROR| File "/usr/lib64/python3.9/subprocess.py", line 1189, in wait +13:53:12 ERROR| return self._wait(timeout=timeout) +13:53:12 ERROR| File "/usr/lib64/python3.9/subprocess.py", line 1909, in _wait +13:53:12 ERROR| raise TimeoutExpired(self.args, timeout) +13:53:12 ERROR| subprocess.TimeoutExpired: Command '('./qemu-system-arm', '-display', 'none', '-vga', 'none', '-chardev', 'socket,id=mon,path=/var/tmp/avo_qemu_sock_hd3upfg6/qemu-2435532-monitor.sock', '-mon', 'chardev=mon,mode=control', '-machine', 'raspi2b', '-chardev', 'socket,id=console,path=/var/tmp/avo_qemu_sock_hd3upfg6/qemu-2435532-console.sock,server=on,wait=off', '-serial', 'chardev:console', '-kernel', '/home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/boot/kernel7.img', '-dtb', '/home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/boot/bcm2709-rpi-2-b.dtb', '-initrd', '/home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/rootfs.cpio', '-append', 'printk.time=0 earlycon=pl011,0x3f201000 console=ttyAMA0 panic=-1 noreboot dwc_otg.fiq_fsm_enable=0', '-no-reboot')' timed out after 300 seconds +13:53:12 ERROR| +13:53:12 ERROR| The above exception was the direct cause of the following exception: +13:53:12 ERROR| +13:53:12 ERROR| Traceback (most recent call last): +13:53:12 ERROR| File "/var/lib/users/cleber/build/qemu/tests/acceptance/boot_linux_console.py", line 502, in test_arm_raspi2_initrd +13:53:12 ERROR| self.vm.wait(300) +13:53:12 ERROR| File "/home/cleber/src/qemu/python/qemu/machine/machine.py", line 561, in wait +13:53:12 ERROR| self.shutdown(has_quit=True, timeout=timeout) +13:53:12 ERROR| File "/home/cleber/src/qemu/python/qemu/machine/machine.py", line 544, in shutdown +13:53:12 ERROR| self._do_shutdown(timeout, has_quit) +13:53:12 ERROR| File "/home/cleber/src/qemu/python/qemu/machine/machine.py", line 517, in _do_shutdown +13:53:12 ERROR| raise AbnormalShutdown("Could not perform graceful shutdown") \ +13:53:12 ERROR| qemu.machine.machine.AbnormalShutdown: Could not perform graceful shutdown +13:53:12 ERROR| +13:53:12 DEBUG| Local variables: +13:53:12 DEBUG| -> self <class 'boot_linux_console.BootLinuxConsole'>: 01-tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_initrd +13:53:12 DEBUG| -> deb_url <class 'str'>: http://archive.raspberrypi.org/debian/pool/main/r/raspberrypi-firmware/raspberrypi-kernel_1.20190215-1_armhf.deb +13:53:12 DEBUG| -> deb_hash <class 'str'>: cd284220b32128c5084037553db3c482426f3972 +13:53:12 DEBUG| -> deb_path <class 'str'>: /home/cleber/avocado/data/cache/by_location/c813ab2b9e4f63b2aa876075ad70d638a31a25b7/raspberrypi-kernel_1.20190215-1_armhf.deb +13:53:12 DEBUG| -> kernel_path <class 'str'>: /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/boot/kernel7.img +13:53:12 DEBUG| -> dtb_path <class 'str'>: /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/boot/bcm2709-rpi-2-b.dtb +13:53:12 DEBUG| -> initrd_url <class 'str'>: https://github.com/groeck/linux-build-test/raw/2eb0a73b5d5a28df3170c546ddaaa9757e1e0848/rootfs/arm/rootfs-armv7a.cpio.gz +13:53:12 DEBUG| -> initrd_hash <class 'str'>: 604b2e45cdf35045846b8bbfbf2129b1891bdc9c +13:53:12 DEBUG| -> initrd_path_gz <class 'str'>: /home/cleber/avocado/data/cache/by_location/d100d022b257e2c8f0c0c97434576ed642f9afe5/rootfs-armv7a.cpio.gz +13:53:12 DEBUG| -> initrd_path <class 'str'>: /home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/rootfs.cpio +13:53:12 DEBUG| -> kernel_command_line <class 'str'>: printk.time=0 earlycon=pl011,0x3f201000 console=ttyAMA0 panic=-1 noreboot dwc_otg.fiq_fsm_enable=0 +13:53:12 DEBUG| DATA (filename=output.expected) => NOT FOUND (data sources: variant, test, file) +13:53:12 DEBUG| DATA (filename=stdout.expected) => NOT FOUND (data sources: variant, test, file) +13:53:12 DEBUG| DATA (filename=stderr.expected) => NOT FOUND (data sources: variant, test, file) +13:53:12 ERROR| Traceback (most recent call last): + +13:53:12 ERROR| File "/home/cleber/src/qemu/python/qemu/machine/machine.py", line 514, in _do_shutdown + self._soft_shutdown(timeout, has_quit) + +13:53:12 ERROR| File "/home/cleber/src/qemu/python/qemu/machine/machine.py", line 497, in _soft_shutdown + self._subp.wait(timeout=timeout) + +13:53:12 ERROR| File "/usr/lib64/python3.9/subprocess.py", line 1189, in wait + return self._wait(timeout=timeout) + +13:53:12 ERROR| File "/usr/lib64/python3.9/subprocess.py", line 1909, in _wait + raise TimeoutExpired(self.args, timeout) + +13:53:12 ERROR| subprocess.TimeoutExpired: Command '('./qemu-system-arm', '-display', 'none', '-vga', 'none', '-chardev', 'socket,id=mon,path=/var/tmp/avo_qemu_sock_hd3upfg6/qemu-2435532-monitor.sock', '-mon', 'chardev=mon,mode=control', '-machine', 'raspi2b', '-chardev', 'socket,id=console,path=/var/tmp/avo_qemu_sock_hd3upfg6/qemu-2435532-console.sock,server=on,wait=off', '-serial', 'chardev:console', '-kernel', '/home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/boot/kernel7.img', '-dtb', '/home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/boot/bcm2709-rpi-2-b.dtb', '-initrd', '/home/cleber/avocado/job-results/job-2021-09-24T13.48-0890f76/test-results/tmp_dirdikw83mj/01-tests_acceptance_boot_linux_console.py_BootLinuxConsole.test_arm_raspi2_initrd/rootfs.cpio', '-append', 'printk.time=0 earlycon=pl011,0x3f201000 console=ttyAMA0 panic=-1 noreboot dwc_otg.fiq_fsm_enable=0', '-no-reboot')' timed out after 300 seconds + +13:53:12 ERROR| +The above exception was the direct cause of the following exception: + + +13:53:12 ERROR| Traceback (most recent call last): + +13:53:12 ERROR| File "/var/lib/users/cleber/build/qemu/tests/venv/lib64/python3.9/site-packages/avocado/core/test.py", line 882, in _run_avocado + raise test_exception + +13:53:12 ERROR| File "/var/lib/users/cleber/build/qemu/tests/venv/lib64/python3.9/site-packages/avocado/core/test.py", line 789, in _run_avocado + testMethod() + +13:53:12 ERROR| File "/var/lib/users/cleber/build/qemu/tests/acceptance/boot_linux_console.py", line 502, in test_arm_raspi2_initrd + self.vm.wait(300) + +13:53:12 ERROR| File "/home/cleber/src/qemu/python/qemu/machine/machine.py", line 561, in wait + self.shutdown(has_quit=True, timeout=timeout) + +13:53:12 ERROR| File "/home/cleber/src/qemu/python/qemu/machine/machine.py", line 544, in shutdown + self._do_shutdown(timeout, has_quit) + +13:53:12 ERROR| File "/home/cleber/src/qemu/python/qemu/machine/machine.py", line 517, in _do_shutdown + raise AbnormalShutdown("Could not perform graceful shutdown") \ + +13:53:12 ERROR| qemu.machine.machine.AbnormalShutdown: Could not perform graceful shutdown + +13:53:12 ERROR| ERROR 01-tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_initrd -> AbnormalShutdown: Could not perform graceful shutdown +13:53:12 INFO | +``` |