diff options
Diffstat (limited to 'results/scraper/launchpad-without-comments/1471904')
| -rw-r--r-- | results/scraper/launchpad-without-comments/1471904 | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/results/scraper/launchpad-without-comments/1471904 b/results/scraper/launchpad-without-comments/1471904 new file mode 100644 index 000000000..50abd02c0 --- /dev/null +++ b/results/scraper/launchpad-without-comments/1471904 @@ -0,0 +1,64 @@ +qemu fails under NeXTStep 3.3 when accessing ROM in SCSI-Adapter am53c974 + +I try to do a fresh install of NeXTStep 3.3 on qemu. After all install floppies are successfully read in, the installation shall start, but aborts right away. During installation process the SCSI host adapter is correctly detected. I don't know, if these adapter where equipped with some special ROM. I thought of installing NeXTStep on a SCSI system due to the IDE problems already known under #1276879. If necessary I would use gdb to track more into this. + +System info: +Linux prerow 3.11.10-29-desktop #1 SMP PREEMPT Thu Mar 5 16:24:00 UTC 2015 (338c513) x86_64 x86_64 x86_64 GNU/Linux +NAME=openSUSE +VERSION="13.1 (Bottle)" +VERSION_ID="13.1" +PRETTY_NAME="openSUSE 13.1 (Bottle) (x86_64)" + +qemu commandline parameter: +/usr/bin/qemu-system-i386 \ + -cpu pentium \ + -monitor stdio \ + -k de \ + -vga cirrus \ + -m 128 \ + -localtime \ + -drive \ + file=.qemu/floppy/3.3_Boot_Disk.floppyimage,format=raw,if=floppy,index=0 \ + -drive \ + file=.qemu/disk/scsihd-2G.qcow2,format=qcow2,id=scsihd0,if=none \ + -drive \ + file=.qemu/cdrom/3.3_InstallCD-NeXTIntel.cdromimage,format=raw,id=scsicd0,if=none \ + -net \ + none \ + -device \ + am53c974,id=AMD0 \ + -device \ + scsi-cd,drive=scsicd0,bus=AMD0.0,lun=0,scsi-id=1,physical_block_size=512,logical_block_size=512 \ + -device \ + scsi-hd,drive=scsihd0,bus=AMD0.0,lun=0,scsi-id=0,removable=off,secs=125,heads=8,cyls=4176,product="ST32151N ",vendor="Seagate ",serial="89683587",ver="2356",physical_block_size=512,logical_block_size=512,dpofua=off + +qemu error message: +qemu: fatal: Trying to execute code outside RAM or ROM at 0xc01754a8 + +EAX=000000ff EBX=0000fffb ECX=000000ff EDX=000000a1 +ESI=00000009 EDI=00011010 EBP=0000ff84 ESP=0000ff6c +EIP=001754a8 EFL=00000007 [-----PC] CPL=0 II=0 A20=1 SMM=0 HLT=0 +ES =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA] +CS =0008 c0000000 3fffffff 00c39a00 DPL=0 CS32 [-R-] +SS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA] +DS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA] +FS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA] +GS =0050 00000000 bfffffff 00cb9300 DPL=0 DS [-WA] +LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT +TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy +GDT= 001c9a58 000000ff +IDT= 001c9bac 000007ff +CR0=00000033 CR2=00000000 CR3=00000000 CR4=00000000 +DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000 +DR6=ffff0ff0 DR7=00000400 +CCS=00000001 CCD=0000000c CCO=INCL +EFER=0000000000000000 +FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80 +FPR0=0000000000000000 0000 FPR1=0000000000000000 0000 +FPR2=0000000000000000 0000 FPR3=0000000000000000 0000 +FPR4=0000000000000000 0000 FPR5=0000000000000000 0000 +FPR6=0000000000000000 0000 FPR7=0000000000000000 0000 +XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000 +XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000 +XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000 +XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000 \ No newline at end of file |