summary refs log tree commit diff stats
path: root/hw/intc/pnv_xive2.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ppc/pnv: Add PnvChipClass handler to get reference to interrupt controllerAditya Gupta2025-09-281-2/+2
| | | | | | | | | | | | | | Existing code in XIVE2 assumes the chip to be a Power10 Chip. Instead add a handler to get reference to the interrupt controller (XIVE) for a given Power Chip. Signed-off-by: Aditya Gupta <adityag@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com> Tested-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Link: https://lore.kernel.org/r/20250925173049.891406-4-adityag@linux.ibm.com Message-ID: <20250925173049.891406-4-adityag@linux.ibm.com>
* ppc/xive: Change presenter .match_nvt to match not presentNicholas Piggin2025-07-211-8/+8
| | | | | | | | | | | | | Have the match_nvt method only perform a TCTX match but don't present the interrupt, the caller presents. This has no functional change, but allows for more complicated presentation logic after matching. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Glenn Miles <milesg@linux.ibm.com> Reviewed-by: Michael Kowal <kowal@linux.ibm.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-29-npiggin@gmail.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
* ppc/xive2: add interrupt priority configuration flagsGlenn Miles2025-07-211-4/+12
| | | | | | | | | | | | | Adds support for extracting additional configuration flags from the XIVE configuration register that are needed for redistribution of group interrupts. Signed-off-by: Glenn Miles <milesg@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Michael Kowal <kowal@linux.ibm.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-22-npiggin@gmail.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
* pnv/xive2: Permit valid writes to VC/PC Flush Control registersMichael Kowal2025-07-211-4/+32
| | | | | | | | | | | | | | | Writes to the Flush Control registers were logged as invalid when they are allowed. Clearing the unsupported want_cache_disable feature is supported, so don't log an error in that case. Signed-off-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Glenn Miles <milesg@linux.ibm.com> Reviewed-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-21-npiggin@gmail.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
* pnv/xive2: VC_ENDC_WATCH_SPEC regs should read back WATCH_FULLNicholas Piggin2025-07-211-1/+0
| | | | | | | | | | | | | | | | Firmware expects to read back the WATCH_FULL bit from the VC_ENDC_WATCH_SPEC register, so don't clear it on read. Don't bother clearing the reads-as-zero CONFLICT bit because it's masked at write already. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Glenn Miles <milesg@linux.ibm.com> Reviewed-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-20-npiggin@gmail.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
* pnv/xive2: Print value in invalid register write loggingMichael Kowal2025-07-211-8/+16
| | | | | | | | | | | | | | | | This can make it easier to see what the target system is trying to do. [npiggin: split from larger patch] Signed-off-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Glenn Miles <milesg@linux.ibm.com> Reviewed-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-19-npiggin@gmail.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
* ppc/xive2: Use fair irq target search algorithmGlenn Miles2025-07-211-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | The current xive algorithm for finding a matching group vCPU target always uses the first vCPU found. And, since it always starts the search with thread 0 of a core, thread 0 is almost always used to handle group interrupts. This can lead to additional interrupt latency and poor performance for interrupt intensive work loads. Changing this to use a simple round-robin algorithm for deciding which thread number to use when starting a search, which leads to a more distributed use of threads for handling group interrupts. [npiggin: Also round-robin among threads, not just cores] Signed-off-by: Glenn Miles <milesg@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Glenn Miles <milesg@linux.ibm.com> Reviewed-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-9-npiggin@gmail.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
* ppc/xive2: Reset Generation Flipped bit on END Cache WatchMichael Kowal2025-07-211-1/+2
| | | | | | | | | | | | | | | | | | When the END Event Queue wraps the END EQ Generation bit is flipped and the Generation Flipped bit is set to one. On a END cache Watch read operation, the Generation Flipped bit needs to be reset. While debugging an error modified END not valid error messages to include the method since all were the same. Signed-off-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Glenn Miles <milesg@linux.ibm.com> Reviewed-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-8-npiggin@gmail.com Signed-off-by: Cédric Le Goater <clg@redhat.com>
* ppc/xive2: Remote VSDs need to match on forwarding addressMichael Kowal2025-07-211-8/+18
| | | | | | | | | | | | | | | | | | In a multi chip environment there will be remote/forwarded VSDs. The check to find a matching INT controller (XIVE) of the remote block number was checking the INTs chip number. Block numbers are not tied to a chip number. The matching remote INT is the one that matches the forwarded VSD address with VSD types associated MMIO BAR. Signed-off-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Glenn Miles <milesg@linux.ibm.com> Reviewed-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com> Tested-by: Gautam Menghani <gautam@linux.ibm.com> Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-5-npiggin@gmail.com [ clg: Fixed log format in pnv_xive2_get_remote() ] Signed-off-by: Cédric Le Goater <clg@redhat.com>
* qom: Make InterfaceInfo[] uses constPhilippe Mathieu-Daudé2025-04-251-1/+1
| | | | | | | | | | | Mechanical change using: $ sed -i -E 's/\(InterfaceInfo.?\[/\(const InterfaceInfo\[/g' \ $(git grep -lE '\(InterfaceInfo.?\[\]\)') Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20250424194905.82506-7-philmd@linaro.org>
* qom: Have class_init() take a const data argumentPhilippe Mathieu-Daudé2025-04-251-1/+1
| | | | | | | | | | Mechanical change using gsed, then style manually adapted to pass checkpatch.pl script. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20250424194905.82506-4-philmd@linaro.org>
* ppc/xive2: Support crowd-matching when looking for targetFrederic Barrat2025-03-111-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | XIVE crowd sizes are encoded into a 2-bit field as follows: 0: 0b00 2: 0b01 4: 0b10 16: 0b11 A crowd size of 8 is not supported. If an END is defined with the 'crowd' bit set, then a target can be running on different blocks. It means that some bits from the block VP are masked when looking for a match. It is similar to groups, but on the block instead of the VP index. Most of the changes are due to passing the extra argument 'crowd' all the way to the function checking for matches. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc/xive2: Add support for MMIO operations on the NVPG/NVC BARFrederic Barrat2025-03-111-14/+66
| | | | | | | | | | | | | Add support for the NVPG and NVC BARs. Access to the BAR pages will cause backlog counter operations to either increment or decriment the counter. Also added qtests for the same. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc/xive2: Add undelivered group interrupt to backlogFrederic Barrat2025-03-111-0/+42
| | | | | | | | | | | | | | | | | | When a group interrupt cannot be delivered, we need to: - increment the backlog counter for the group in the NVG table (if the END is configured to keep a backlog). - start a broadcast operation to set the LSMFB field on matching CPUs which can't take the interrupt now because they're running at too high a priority. [npiggin: squash in fixes from milesg] [milesg: only load the NVP if the END is !ignore] [milesg: always broadcast backlog, not only when there are precluded VPs] Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* ppc/xive2: Support group-matching when looking for targetFrederic Barrat2025-03-111-13/+25
| | | | | | | | | | | | | If an END has the 'i' bit set (ignore), then it targets a group of VPs. The size of the group depends on the VP index of the target (first 0 found when looking at the least significant bits of the index) so a mask is applied on the VP index of a running thread to know if we have a match. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* Merge tag 'exec-20241220' of https://github.com/philmd/qemu into stagingStefan Hajnoczi2024-12-211-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Accel & Exec patch queue - Ignore writes to CNTP_CTL_EL0 on HVF ARM (Alexander) - Add '-d invalid_mem' logging option (Zoltan) - Create QOM containers explicitly (Peter) - Rename sysemu/ -> system/ (Philippe) - Re-orderning of include/exec/ headers (Philippe) Move a lot of declarations from these legacy mixed bag headers: . "exec/cpu-all.h" . "exec/cpu-common.h" . "exec/cpu-defs.h" . "exec/exec-all.h" . "exec/translate-all" to these more specific ones: . "exec/page-protection.h" . "exec/translation-block.h" . "user/cpu_loop.h" . "user/guest-host.h" . "user/page-protection.h" # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdlnyAACgkQ4+MsLN6t # wN6mBw//QFWi7CrU+bb8KMM53kOU9C507tjn99LLGFb5or73/umDsw6eo/b8DHBt # KIwGLgATel42oojKfNKavtAzLK5rOrywpboPDpa3SNeF1onW+99NGJ52LQUqIX6K # A6bS0fPdGG9ZzEuPpbjDXlp++0yhDcdSgZsS42fEsT7Dyj5gzJYlqpqhiXGqpsn8 # 4Y0UMxSL21K3HEexlzw2hsoOBFA3tUm2ujNDhNkt8QASr85yQVLCypABJnuoe/// # 5Ojl5wTBeDwhANET0rhwHK8eIYaNboiM9fHopJYhvyw1bz6yAu9jQwzF/MrL3s/r # xa4OBHBy5mq2hQV9Shcl3UfCQdk/vDaYaWpgzJGX8stgMGYfnfej1SIl8haJIfcl # VMX8/jEFdYbjhO4AeGRYcBzWjEJymkDJZoiSWp2NuEDi6jqIW+7yW1q0Rnlg9lay # ShAqLK5Pv4zUw3t0Jy3qv9KSW8sbs6PQxtzXjk8p97rTf76BJ2pF8sv1tVzmsidP # 9L92Hv5O34IqzBu2oATOUZYJk89YGmTIUSLkpT7asJZpBLwNM2qLp5jO00WVU0Sd # +kAn324guYPkko/TVnjC/AY7CMu55EOtD9NU35k3mUAnxXT9oDUeL4NlYtfgrJx6 # x1Nzr2FkS68+wlPAFKNSSU5lTjsjNaFM0bIJ4LCNtenJVP+SnRo= # =cjz8 # -----END PGP SIGNATURE----- # gpg: Signature made Fri 20 Dec 2024 11:45:20 EST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'exec-20241220' of https://github.com/philmd/qemu: (59 commits) util/qemu-timer: fix indentation meson: Do not define CONFIG_DEVICES on user emulation system/accel-ops: Remove unnecessary 'exec/cpu-common.h' header system/numa: Remove unnecessary 'exec/cpu-common.h' header hw/xen: Remove unnecessary 'exec/cpu-common.h' header target/mips: Drop left-over comment about Jazz machine target/mips: Remove tswap() calls in semihosting uhi_fstat_cb() target/xtensa: Remove tswap() calls in semihosting simcall() helper accel/tcg: Un-inline translator_is_same_page() accel/tcg: Include missing 'exec/translation-block.h' header accel/tcg: Move tcg_cflags_has/set() to 'exec/translation-block.h' accel/tcg: Restrict curr_cflags() declaration to 'internal-common.h' qemu/coroutine: Include missing 'qemu/atomic.h' header exec/translation-block: Include missing 'qemu/atomic.h' header accel/tcg: Declare cpu_loop_exit_requested() in 'exec/cpu-common.h' exec/cpu-all: Include 'cpu.h' earlier so MMU_USER_IDX is always defined target/sparc: Move sparc_restore_state_to_opc() to cpu.c target/sparc: Uninline cpu_get_tb_cpu_state() target/loongarch: Declare loongarch_cpu_dump_state() locally user: Move various declarations out of 'exec/exec-all.h' ... Conflicts: hw/char/riscv_htif.c hw/intc/riscv_aplic.c target/s390x/cpu.c Apply sysemu header path changes to not in the pull request. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
| * include: Rename sysemu/ -> system/Philippe Mathieu-Daudé2024-12-201-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Headers in include/sysemu/ are not only related to system *emulation*, they are also used by virtualization. Rename as system/ which is clearer. Files renamed manually then mechanical change using sed tool. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Lei Yang <leiyang@redhat.com> Message-Id: <20241203172445.28576-1-philmd@linaro.org>
* | include/hw/qdev-properties: Remove DEFINE_PROP_END_OF_LISTRichard Henderson2024-12-191-1/+0
|/ | | | | | | | | | | | | | Now that all of the Property arrays are counted, we can remove the terminator object from each array. Update the assertions in device_class_set_props to match. With struct Property being 88 bytes, this was a rather large form of terminator. Saves 30k from qemu-system-aarch64. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Lei Yang <leiyang@redhat.com> Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/intc: Constify all PropertyRichard Henderson2024-12-151-1/+1
| | | | | | Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* ppc/xive2: Dump the VP-group and crowd tables with 'info pic'Frederic Barrat2024-11-041-3/+41
| | | | | | | | | | The 'info pic' HMP command dumps the state of the interrupt controller. Add the dump of the NVG and NVC tables to its output to ease debug. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* pnv/xive2: Move xive2_nvp_pic_print_info() to xive2.cFrederic Barrat2024-07-261-27/+0
| | | | | | | | | | Moving xive2_nvp_pic_print_info() to align with the other "pic_print_info" functions. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* pnv/xive2: Fail VST entry address computation if table has no VSDFrederic Barrat2024-07-261-0/+5
| | | | | | | | | | | | Fail VST entry address computation if firmware doesn't define a descriptor for one of the Virtualization Structure Tables (VST), there's no point in trying to compute the address of its entry. Abort the operation and log an error. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* pnv/xive2: Set Translation Table for the NVC port spaceFrederic Barrat2024-07-261-0/+1
| | | | | | | | | | | | Set Translation Table for the NVC port space is missing. The xive model doesn't take into account the remapping of IO operations via the Set Translation Table but firmware is allowed to define it for the Notify Virtual Crowd (NVC), like it's already done for the other VST tables. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* pnv/xive2: Enable VST NVG and NVC index compressionFrederic Barrat2024-07-261-0/+20
| | | | | | | | | | | | | | | | | Enable NVG and NVC VST tables for index compression which indicates the number of bits the address is shifted to the right for the table accesses. The compression values are defined as: 0000 - No compression 0001 - 1 bit shift 0010 - 2 bit shift .... 1000 - 8 bit shift 1001-1111 - No compression Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* pnv/xive2: Configure Virtualization Structure Tables through the PCFrederic Barrat2024-07-261-9/+38
| | | | | | | | | | | | | | | | | | | | | Both the virtualization layer (VC) and presentation layer (PC) need to be configured to access the VSTs. Since the information is redundant, the xive model combines both into one set of tables and only the definitions going through the VC are kept. The definitions through the PC are ignored. That works well as long as firmware calls the VC for all the tables. For the NVG and NVC tables, it can make sense to only configure them with the PC, since they are only used by the presenter. So this patch allows firmware to configure the VST tables through the PC as well. The definitions are still shared, since the VST tables can be set through both the VC and/or PC, they are dynamically re-mapped in memory by first deleting the memory subregion. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* pnv/xive2: Add NVG and NVC to cache watch facilityFrederic Barrat2024-07-261-11/+38
| | | | | | | | | | | | | | | The cache watch facility uses the same register interface to handle entries in the NVP, NVG and NVC tables. A bit-field in the 'watchX specification' register tells the table type. So far, that bit-field was not read and the code assumed a read/write to the NVP table. This patch allows to read/write entries in the NVG and NVC table as well. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* pnv/xive: Support cache flush and queue sync inject with notificationsNicholas Piggin2024-07-261-2/+152
| | | | | | | | | | | | | | | Adds support for writing a completion notification byte in memory whenever a cache flush or queue sync inject operation is requested by software. QEMU does not cache any of the XIVE data that is in memory and therefore it simply writes the completion notification byte at the time that the operation is requested. Co-authored-by: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* pnv/xive2: Structure/define alignment changesMichael Kowal2024-07-261-15/+15
| | | | | | | | | Made changes to some structure and define elements to ease review in next patchset. Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* pnv/xive2: XIVE2 Cache Watch, Cache Flush and Sync Injection supportFrederic Barrat2024-07-261-36/+215
| | | | | | | | | | | | | | | | | | | | | | XIVE offers a 'cache watch facility', which allows software to read/update a potentially cached table entry with no software lock. There's one such facility in the Virtualization Controller (VC) to update the ESB and END entries and one in the Presentation Controller (PC) to update the NVP/NVG/NVC entries. Each facility has 4 cache watch engines to control the updates and firmware can request an available engine by querying the hardware 'watch_assign' register of the VC or PC. The engine is then reserved and is released after the data is updated by reading the 'watch_spec' register (which also allows to check for a conflict during the update). If no engine is available, the special value 0xFF is returned and firmware is expected to repeat the request until an engine becomes available. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
* hw/ppc: Avoid using Monitor in pnv_xive2_pic_print_info()Philippe Mathieu-Daudé2024-06-191-8/+1
| | | | | | | | | | Replace Monitor API by HumanReadableText one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-Id: <20240610062105.49848-23-philmd@linaro.org>
* hw/ppc: Avoid using Monitor in xive2_nvp_pic_print_info()Philippe Mathieu-Daudé2024-06-191-14/+15
| | | | | | | | | | Replace Monitor API by HumanReadableText one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-Id: <20240610062105.49848-22-philmd@linaro.org>
* hw/ppc: Avoid using Monitor in xive2_end_pic_print_info()Philippe Mathieu-Daudé2024-06-191-4/+4
| | | | | | | | | | Replace Monitor API by HumanReadableText one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-Id: <20240610062105.49848-21-philmd@linaro.org>
* hw/ppc: Avoid using Monitor in xive2_end_eas_pic_print_info()Philippe Mathieu-Daudé2024-06-191-5/+5
| | | | | | | | | | Replace Monitor API by HumanReadableText one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-Id: <20240610062105.49848-19-philmd@linaro.org>
* hw/ppc: Avoid using Monitor in xive2_eas_pic_print_info()Philippe Mathieu-Daudé2024-06-191-8/+8
| | | | | | | | | | Replace Monitor API by HumanReadableText one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-Id: <20240610062105.49848-18-philmd@linaro.org>
* hw/ppc: Avoid using Monitor in xive_source_pic_print_info()Philippe Mathieu-Daudé2024-06-191-1/+7
| | | | | | | | | | Replace Monitor API by HumanReadableText one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Message-Id: <20240610062105.49848-10-philmd@linaro.org>
* ppc/xive: Use address_space routines to access the machine RAMCédric Le Goater2023-09-061-4/+23
| | | | | | | to log an error in case of bad configuration of the XIVE tables by the FW. Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* pnv/xive2: Always pass a presenter object when accessing the TIMAFrederic Barrat2023-07-071-2/+4
| | | | | | | | | | | | | | The low-level functions to access the TIMA take a presenter object as a first argument. When accessing the TIMA from the IC BAR, i.e. indirect calls, we currently pass a NULL pointer for the presenter argument. While it appears ok with the current usage, it's dangerous. And it's pretty easy to figure out the presenter in that context, so this patch fixes it. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20230705081400.218408-1-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* pnv/xive2: Fix TIMA offset for indirect accessFrederic Barrat2023-07-071-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Direct TIMA operations can be done through 4 pages, each with a different privilege level dictating what fields can be accessed. On the other hand, indirect TIMA accesses on P10 are done through a single page, which is the equivalent of the most privileged page of direct TIMA accesses. The offset in the IC bar of an indirect access specifies what hw thread is targeted (page shift bits) and the offset in the TIMA being accessed (the page offset bits). When the indirect access is calling the underlying direct access functions, it is therefore important to clearly separate the 2, as the direct functions assume any page shift bits define the privilege ring level. For indirect accesses, those bits must be 0. This patch fixes the offset passed to direct TIMA functions. It didn't matter for SMT1, as the 2 least significant bits of the page shift are part of the hw thread ID and always 0, so the direct TIMA functions were accessing the privilege ring 0 page. With SMT4/8, it is no longer true. The fix is specific to P10, as indirect TIMA access on P9 was handled differently. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20230703080858.54060-1-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* pnv/xive2: Allow indirect TIMA accesses of all sizesFrederic Barrat2023-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Booting linux on the powernv10 machine logs a few errors like: Invalid read at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8) Invalid write at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8) Invalid read at addr 0x38, size 1, region 'xive-ic-tm-indirect', reason: invalid size (min:8 max:8) Those errors happen when linux is resetting XIVE. We're trying to read/write the enablement bit for the hardware context and qemu doesn't allow indirect TIMA accesses of less than 8 bytes. Direct TIMA access can go through though, as well as indirect TIMA accesses on P9. So even though there are some restrictions regarding the address/size combinations for TIMA access, the example above is perfectly valid. This patch lets indirect TIMA accesses of all sizes go through. The special operations will be intercepted and the default "raw" handlers will pick up all other requests and complain about invalid sizes as appropriate. Tested-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20230626094057.1192473-1-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* pnv/xive2: Check TIMA special ops against a dedicated array for P10Frederic Barrat2023-06-251-32/+0
| | | | | | | | | | | | | | | | | | | | | | | | Accessing the TIMA from some specific ring/offset combination can trigger a special operation, with or without side effects. It is implemented in qemu with an array of special operations to compare accesses against. Since the presenter on P10 is pretty similar to P9, we had the full array defined for P9 and we just had a special case for P10 to treat one access differently. With a recent change, 6f2cbd133d4 ("pnv/xive2: Handle TIMA access through all ports"), we now ignore some of the bits of the TIMA address, but that patch managed to botch the detection of the special case for P10. To clean that up, this patch introduces a full array of special ops to be used for P10. The code to detect a special access is common with P9, only the array of operations differs. The presenter can pick the correct array of special ops based on its configuration introduced in a previous patch. Fixes: Coverity CID 1512997, 1512998 Fixes: 6f2cbd133d4 ("pnv/xive2: Handle TIMA access through all ports") Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* pnv/xive2: Add a get_config() method on the presenter classFrederic Barrat2023-06-251-0/+12
| | | | | | | | | | | | The presenters for xive on P9 and P10 are mostly similar but the behavior can be tuned through a few CQ registers. This patch adds a "get_config" method, which will allow to access that config from the presenter in a later patch. For now, just define the config for the TIMA version. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* pnv/xive2: Quiet down some error messagesFrederic Barrat2023-06-101-0/+4
| | | | | | | | | | | | | | | | | | | When dumping the END and NVP tables ("info pic" from the HMP) on the P10 model, we're likely to be flooded with error messages such as: XIVE[0] - VST: invalid NVPT entry f33800 !? The error is printed when finding an empty VSD in an indirect table (thus END and NVP tables with skiboot), which is going to happen when dumping the xive state. So let's tune down those messages. They can be re-enabled easily with a macro if needed. Those errors were already hidden on xive/P9, for the same reason. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230531150537.369350-1-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* pnv/xive2: Handle TIMA access through all portsFrederic Barrat2023-06-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | The Thread Interrupt Management Area (TIMA) can be accessed through 4 ports, targeted by the address. The base address of a TIMA is using port 0 and the other ports are 0x80 apart. Using one port or another can be useful to balance the load on the snoop buses. With skiboot and linux, we currently use port 0, but as it tends to be busy, another hypervisor is using port 1 for TIMA access. The port address bits fall in between the special op indication bits (the 2 MSBs) and the register offset bits (the 6 LSBs). They are "don't care" for the hardware when processing a TIMA operation. This patch filters out those port address bits so that a TIMA operation can be triggered using any port. It is also true for indirect access (through the IC BAR) and it's actually nothing new, it was already the case on P9. Which helps here, as the TIMA handling code is common between P9 (xive) and P10 (xive2). Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230601121331.487207-6-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* pnv/xive2: Allow writes to the Physical Thread Enable registersFrederic Barrat2023-06-101-0/+1
| | | | | | | | | | | | | Fix what was probably a silly mistake and allow to write the Physical Thread enable registers 0 and 1. Skiboot prefers to use the ENx_SET variant so it went unnoticed, but there's no reason to discard a write to the full register, it is Read-Write. Fixes: da71b7e3ed45 ("ppc/pnv: Add a XIVE2 controller to the POWER10 chip") Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230601121331.487207-4-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* pnv/xive2: Add definition for the ESB cache configuration registerFrederic Barrat2023-06-101-0/+7
| | | | | | | | | | | | | | | | | Add basic read/write support for the ESB cache configuration register on P10. We don't model the ESB cache in qemu so reading/writing the register won't do anything, but it avoids logging a guest error when skiboot configures it: qemu-system-ppc64 -machine powernv10 ... -d guest_errors ... XIVE[0] - VC: invalid read @240 XIVE[0] - VC: invalid write @240 Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230601121331.487207-3-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* pnv/xive2: Add definition for TCTXT Config registerFrederic Barrat2023-06-101-1/+7
| | | | | | | | | | | | | | | | | Add basic read/write support for the TCTXT Config register on P10. qemu doesn't do anything with it yet, but it avoids logging a guest error when skiboot configures the fused-core state: qemu-system-ppc64 -machine powernv10 ... -d guest_errors ... [ 0.131670000,5] XIVE: [ IC 00 ] Initializing XIVE block ID 0... XIVE[0] - TCTXT: invalid read @140 XIVE[0] - TCTXT: invalid write @140 Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20230601121331.487207-2-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* include/hw/ppc: Split pnv_chip.h off pnv.hMarkus Armbruster2023-01-201-0/+1
| | | | | | | | | | | | | | | | | | | | PnvChipClass, PnvChip, Pnv8Chip, Pnv9Chip, and Pnv10Chip are defined in pnv.h. Many users of the header don't actually need them. One instance is this inclusion loop: hw/ppc/pnv_homer.h includes hw/ppc/pnv.h for typedef PnvChip, and vice versa for struct PnvHomer. Similar structs live in their own headers: PnvHomerClass and PnvHomer in pnv_homer.h, PnvLpcClass and PnvLpcController in pci_lpc.h, PnvPsiClass, PnvPsi, Pnv8Psi, Pnv9Psi, Pnv10Psi in pnv_psi.h, ... Move PnvChipClass, PnvChip, Pnv8Chip, Pnv9Chip, and Pnv10Chip to new pnv_chip.h, and adjust include directives. This breaks the inclusion loop mentioned above. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20221222104628.659681-2-armbru@redhat.com>
* ppc: Define SETFIELD for the ppc targetAlexey Kardashevskiy2022-07-061-20/+0
| | | | | | | | | | | | | It keeps repeating, move it to the header. This uses __builtin_ffsll() to allow using the macros in #define. This is not using the QEMU's FIELD macros as this would require changing all such macros found in skiboot (the PPC PowerNV firmware). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220628080544.1509428-1-aik@ozlabs.ru> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* pnv/xive2: Access direct mapped thread contexts from all chipsFrederic Barrat2022-06-201-4/+14
| | | | | | | | | | | | | | | | | When accessing a thread context through the IC BAR, the offset of the page in the BAR identifies the CPU. From that offset, we can compute the PIR (processor ID register) of the CPU to do the data structure lookup. On P10, the current code assumes an access for node 0 when computing the PIR. Everything is almost in place to allow access for other nodes though. So this patch reworks how the PIR value is computed so that we can access all thread contexts through the IC BAR. The PIR is already correct on P9, so no need to modify anything there. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220602165310.558810-1-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* pnv/xive2: Don't overwrite PC registers when writing TCTXT registersFrederic Barrat2022-05-261-3/+0
| | | | | | | | | | | | | | | | | | | When writing a register from the TCTXT memory region (4th page within the IC BAR), we were overwriting the Presentation Controller (PC) register at the same offset. It looks like a silly cut and paste error. We were somehow lucky: the TCTXT registers being touched are TCTXT_ENx/_SET/_RESET to enable physical threads and the PC registers at the same offset are either not used by our model or the update was harmless. Found through code inspection. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220523151859.72283-1-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>