summary refs log tree commit diff stats
path: root/hw/nvram/eeprom_at24c.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* qom: Have class_init() take a const data argumentPhilippe Mathieu-Daudé2025-04-251-1/+1
| | | | | | | | | | Mechanical change using gsed, then style manually adapted to pass checkpatch.pl script. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20250424194905.82506-4-philmd@linaro.org>
* hw/nvram/eeprom_at24c: Reorganise init to avoid overwriting valuesBALATON Zoltan2025-03-051-4/+2
| | | | | | | | | | | | | | | | The init_rom[] can write values to the beginning of the memory but these are overwritten by values from a backing file that covers the whole memory. init_rom[] is used only if there's no backing file (provides default content) but should not overwrite backing file content (especially leaving the file unchanged and only change it in memory). Do the init_rom[] handling only if it would not be overwritten. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <fd8e0478febd60d5f48c58bc77c60e043d1c3cdc.1740839457.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* hw/nvram/eeprom_at24c: Remove memset after g_malloc0BALATON Zoltan2025-03-051-1/+0
| | | | | | | | | | | | | Calling memset to zero memory is not needed after g_malloc0 which already clears memory. These used to be in separate functions but after some patches the memset ended up after g_malloc0 and thus can be dropped. Fixes: 4f2c6448c3 (hw/nvram/eeprom_at24c: Make reset behavior more like hardware) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <ff281851e6d824ecd01b8b5cd955328dae1515a0.1740839457.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* hw/nvram/eeprom_at24c: Remove ERR macro that calls fprintf to stderrBALATON Zoltan2025-03-051-7/+5
| | | | | | | | | | | In the realize method error_setg can be used like other places there already do. The other usage can be replaced with error_report which is the preferred way instead of directly printing to stderr. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <637b92984795a385b648a84208f093947cc261e4.1740839457.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* hw/nvram/eeprom_at24c: Use OBJECT_DECLARE_SIMPLE_TYPEBALATON Zoltan2025-03-051-3/+1
| | | | | | | | | No need to open code it so use the simple object type declaration. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <08d9900af04789ede485942c8072eaa58bf52f80.1740839457.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* Merge tag 'exec-20241220' of https://github.com/philmd/qemu into stagingStefan Hajnoczi2024-12-211-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Accel & Exec patch queue - Ignore writes to CNTP_CTL_EL0 on HVF ARM (Alexander) - Add '-d invalid_mem' logging option (Zoltan) - Create QOM containers explicitly (Peter) - Rename sysemu/ -> system/ (Philippe) - Re-orderning of include/exec/ headers (Philippe) Move a lot of declarations from these legacy mixed bag headers: . "exec/cpu-all.h" . "exec/cpu-common.h" . "exec/cpu-defs.h" . "exec/exec-all.h" . "exec/translate-all" to these more specific ones: . "exec/page-protection.h" . "exec/translation-block.h" . "user/cpu_loop.h" . "user/guest-host.h" . "user/page-protection.h" # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdlnyAACgkQ4+MsLN6t # wN6mBw//QFWi7CrU+bb8KMM53kOU9C507tjn99LLGFb5or73/umDsw6eo/b8DHBt # KIwGLgATel42oojKfNKavtAzLK5rOrywpboPDpa3SNeF1onW+99NGJ52LQUqIX6K # A6bS0fPdGG9ZzEuPpbjDXlp++0yhDcdSgZsS42fEsT7Dyj5gzJYlqpqhiXGqpsn8 # 4Y0UMxSL21K3HEexlzw2hsoOBFA3tUm2ujNDhNkt8QASr85yQVLCypABJnuoe/// # 5Ojl5wTBeDwhANET0rhwHK8eIYaNboiM9fHopJYhvyw1bz6yAu9jQwzF/MrL3s/r # xa4OBHBy5mq2hQV9Shcl3UfCQdk/vDaYaWpgzJGX8stgMGYfnfej1SIl8haJIfcl # VMX8/jEFdYbjhO4AeGRYcBzWjEJymkDJZoiSWp2NuEDi6jqIW+7yW1q0Rnlg9lay # ShAqLK5Pv4zUw3t0Jy3qv9KSW8sbs6PQxtzXjk8p97rTf76BJ2pF8sv1tVzmsidP # 9L92Hv5O34IqzBu2oATOUZYJk89YGmTIUSLkpT7asJZpBLwNM2qLp5jO00WVU0Sd # +kAn324guYPkko/TVnjC/AY7CMu55EOtD9NU35k3mUAnxXT9oDUeL4NlYtfgrJx6 # x1Nzr2FkS68+wlPAFKNSSU5lTjsjNaFM0bIJ4LCNtenJVP+SnRo= # =cjz8 # -----END PGP SIGNATURE----- # gpg: Signature made Fri 20 Dec 2024 11:45:20 EST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'exec-20241220' of https://github.com/philmd/qemu: (59 commits) util/qemu-timer: fix indentation meson: Do not define CONFIG_DEVICES on user emulation system/accel-ops: Remove unnecessary 'exec/cpu-common.h' header system/numa: Remove unnecessary 'exec/cpu-common.h' header hw/xen: Remove unnecessary 'exec/cpu-common.h' header target/mips: Drop left-over comment about Jazz machine target/mips: Remove tswap() calls in semihosting uhi_fstat_cb() target/xtensa: Remove tswap() calls in semihosting simcall() helper accel/tcg: Un-inline translator_is_same_page() accel/tcg: Include missing 'exec/translation-block.h' header accel/tcg: Move tcg_cflags_has/set() to 'exec/translation-block.h' accel/tcg: Restrict curr_cflags() declaration to 'internal-common.h' qemu/coroutine: Include missing 'qemu/atomic.h' header exec/translation-block: Include missing 'qemu/atomic.h' header accel/tcg: Declare cpu_loop_exit_requested() in 'exec/cpu-common.h' exec/cpu-all: Include 'cpu.h' earlier so MMU_USER_IDX is always defined target/sparc: Move sparc_restore_state_to_opc() to cpu.c target/sparc: Uninline cpu_get_tb_cpu_state() target/loongarch: Declare loongarch_cpu_dump_state() locally user: Move various declarations out of 'exec/exec-all.h' ... Conflicts: hw/char/riscv_htif.c hw/intc/riscv_aplic.c target/s390x/cpu.c Apply sysemu header path changes to not in the pull request. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
| * include: Rename sysemu/ -> system/Philippe Mathieu-Daudé2024-12-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Headers in include/sysemu/ are not only related to system *emulation*, they are also used by virtualization. Rename as system/ which is clearer. Files renamed manually then mechanical change using sed tool. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Lei Yang <leiyang@redhat.com> Message-Id: <20241203172445.28576-1-philmd@linaro.org>
* | include/hw/qdev-properties: Remove DEFINE_PROP_END_OF_LISTRichard Henderson2024-12-191-1/+0
|/ | | | | | | | | | | | | | Now that all of the Property arrays are counted, we can remove the terminator object from each array. Update the assertions in device_class_set_props to match. With struct Property being 88 bytes, this was a rather large form of terminator. Saves 30k from qemu-system-aarch64. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Lei Yang <leiyang@redhat.com> Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/nvram: Constify all PropertyRichard Henderson2024-12-151-1/+1
| | | | | Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* hw: Use device_class_set_legacy_reset() instead of opencodingPeter Maydell2024-09-131-1/+1
| | | | | | | | | | | | | Use device_class_set_legacy_reset() instead of opencoding an assignment to DeviceClass::reset. This change was produced with: spatch --macro-file scripts/cocci-macro-file.h \ --sp-file scripts/coccinelle/device-reset.cocci \ --keep-comments --smpl-spacing --in-place --dir hw Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org
* hw/other: spelling fixesMichael Tokarev2023-09-211-1/+1
| | | | | Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
* hw/at24c : modify at24c to support 1 byte address modeSittisak Sinprem2023-03-021-3/+27
| | | | | | | | Signed-off-by: Sittisak Sinprem <ssinprem@celestica.com> Reviewed-by: Peter Delevoryas <peter@pjd.dev> [ clg: checkpatch issues ] Message-Id: <167660539263.10409.9736070122710923479-1@git.sr.ht> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* hw/nvram/eeprom_at24c: Make reset behavior more like hardwarePeter Delevoryas2023-02-071-12/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | EEPROM's are a form of non-volatile memory. After power-cycling an EEPROM, I would expect the I2C state machine to be reset to default values, but I wouldn't really expect the memory to change at all. The current implementation of the at24c EEPROM resets its internal memory on reset. This matches the specification in docs/devel/reset.rst: Cold reset is supported by every resettable object. In QEMU, it means we reset to the initial state corresponding to the start of QEMU; this might differ from what is a real hardware cold reset. It differs from other resets (like warm or bus resets) which may keep certain parts untouched. But differs from my intuition. For example, if someone writes some information to an EEPROM, then AC power cycles their board, they would expect the EEPROM to retain that information. It's very useful to be able to test things like this in QEMU as well, to verify software instrumentation like determining the cause of a reboot. Fixes: 5d8424dbd3e8 ("nvram: add AT24Cx i2c eeprom") Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-6-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
* hw/nvram/eeprom_at24c: Add init_rom field and at24c_eeprom_init_rom helperPeter Delevoryas2023-02-071-5/+31
| | | | | | | | | | | | | | | | | Allows users to specify binary data to initialize an EEPROM, allowing users to emulate data programmed at manufacturing time. - Added init_rom and init_rom_size attributes to TYPE_AT24C_EE - Added at24c_eeprom_init_rom helper function to initialize attributes - If -drive property is provided, it overrides init_rom data Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Ninad Palsule <ninadpalsule@us.ibm.com> Link: https://lore.kernel.org/r/20230128060543.95582-4-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
* hw/arm: Extract at24c_eeprom_init helper from Aspeed and Nuvoton boardsPeter Delevoryas2023-02-071-0/+12
| | | | | | | | | | | | This helper is useful in board initialization because lets users initialize and realize an EEPROM on an I2C bus with a single function call. Signed-off-by: Peter Delevoryas <peter@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Corey Minyard <cminyard@mvista.com> Link: https://lore.kernel.org/r/20230128060543.95582-2-peter@pjd.dev Signed-off-by: Cédric Le Goater <clg@kaod.org>
* block: Change blk_{pread,pwrite}() param orderAlberto Faria2022-07-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Swap 'buf' and 'bytes' around for consistency with blk_co_{pread,pwrite}(), and in preparation to implement these functions using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes, flags; @@ - blk_pread(blk, offset, buf, bytes, flags) + blk_pread(blk, offset, bytes, buf, flags) @@ expression blk, offset, buf, bytes, flags; @@ - blk_pwrite(blk, offset, buf, bytes, flags) + blk_pwrite(blk, offset, bytes, buf, flags) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-4-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
* block: Add a 'flags' param to blk_pread()Alberto Faria2022-07-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | For consistency with other I/O functions, and in preparation to implement it using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes; @@ - blk_pread(blk, offset, buf, bytes) + blk_pread(blk, offset, buf, bytes, 0) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-3-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
* block: Make blk_{pread,pwrite}() return 0 on successAlberto Faria2022-07-121-4/+4
| | | | | | | | | | | | | They currently return the value of their 'bytes' parameter on success. Make them return 0 instead, for consistency with other I/O functions and in preparation to implement them using generated_co_wrapper. This also makes it clear that short reads/writes are not possible. Signed-off-by: Alberto Faria <afaria@redhat.com> Message-Id: <20220705161527.1054072-2-afaria@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
* hw/i2c: add asynchronous sendKlaus Jensen2022-06-301-0/+2
| | | | | | | | | | | | | | | | | Add an asynchronous version of i2c_send() that requires the slave to explicitly acknowledge on the bus with i2c_ack(). The current master must use the new i2c_start_send_async() to indicate that it wants to do an asynchronous transfer. This allows the i2c core to check if the target slave supports this or not. This approach relies on adding a new enum i2c_event member, which is why a bunch of other devices needs changes in their event handling switches. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Message-Id: <20220601210831.67259-5-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-6-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
* hw/nvram: at24 return 0xff if 1 byte addressPatrick Venture2022-03-141-1/+6
| | | | | | | | | | | | | | The at24 eeproms are 2 byte devices that return 0xff when they are read from with a partial (1-byte) address written. This distinction was found comparing model behavior to real hardware testing. Tested: `i2ctransfer -f -y 45 w1@85 0 r1` returns 0xff instead of next byte Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211220212137.1244511-1-venture@google.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* hw/nvram: use at24 macroPatrick Venture2022-02-211-1/+1
| | | | | | | | | Use the macro for going from I2CSlave to EEPROMState. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220119214329.2557049-1-venture@google.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost2020-12-181-0/+1
| | | | | | | | | | | Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Use DECLARE_*CHECKER* macrosEduardo Habkost2020-09-091-1/+2
| | | | | | | | | | | | | | | Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Move QOM typedefs and add missing includesEduardo Habkost2020-09-091-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* qdev: set properties with device_class_set_props()Marc-André Lureau2020-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Include hw/qdev-properties.h lessMarkus Armbruster2019-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
* Include hw/hw.h exactly where neededMarkus Armbruster2019-08-161-1/+0
| | | | | | | | | | | | | | | | In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster2019-06-121-0/+1
| | | | | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
* i2c: have I2C receive operation return uint8_tCorey Minyard2019-02-271-2/+2
| | | | | | | | | | | It is never supposed to fail and cannot return an error, so just have it return the proper type. Have it return 0xff on nothing available, since that's what would happen on a real bus. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::initPhilippe Mathieu-Daudé2018-06-011-13/+11
| | | | | | | | | | | I2CSlaveClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-3-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-3-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Clean up includesMarkus Armbruster2018-02-091-2/+1
| | | | | | | | | | | | | | | Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the change to target/s390x/gen-features.c manually reverted, and blank lines around deletions collapsed. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-3-armbru@redhat.com>
* nvram: add AT24Cx i2c eepromMichael Davidsaver2017-12-151-0/+205
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>